Understanding the solidification of stainless steel slag and dust mixtures

Sung Suk Jung, Gi Beom Kim, Il Sohn

Research output: Contribution to journalArticlepeer-review

27 Citations (Scopus)


The solidification of a multicomponent stainless steel slag and dust composite has been studied by thermodynamic calculations using Factsage and analyses of samples using EPMA and Rietveld refinement of synchrotron X-ray powder diffraction after various cooling rates. At an apparent cooling rate of 1 K/min, the content of spinel (10.6 wt%) was less than thermodynamically calculated (16.6 wt%), largely because of difficulties in the diffusion of depleted ions (including Cr, Mn, and Ni) in the liquid with very gradual compositional gradients. Melilite showed a uniform but distorted crystal structure of P21212 and its content (48.9 wt%) was larger than the calculated result (32.3 wt%). At apparent cooling rates of 10 K/min and 50 K/min, a slight decrease in spinel and a significant decrease in melilite were observed, and the spinel was divided into two regions with an identical space group of Fd (Formula presented.) m but with distinguished composition and lattice parameters. However, the amorphous proportion consistently increased with the cooling rate from 29.4 wt% at 1 K/min to 69.6 and 92.9 wt% at 10 K/min and 50 K/min respectively.

Original languageEnglish
Pages (from-to)3771-3783
Number of pages13
JournalJournal of the American Ceramic Society
Issue number8
Publication statusPublished - 2017 Aug

Bibliographical note

Publisher Copyright:
© 2017 The American Ceramic Society

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Materials Chemistry


Dive into the research topics of 'Understanding the solidification of stainless steel slag and dust mixtures'. Together they form a unique fingerprint.

Cite this