Synthesis of Ni-based bulk metallic glass matrix composites containing ductile brass phase by warm extrusion of gas atomized powders

M. H. Lee, D. H. Bae, D. H. Kim, D. J. Sordelet

Research output: Contribution to journalArticlepeer-review

51 Citations (Scopus)


To prevent catastrophic failure by propagating highly localized shear bands and to overcome the limited dimension of metallic glass, centimeter-scale Ni59Zr20Ti16Si2Sn3 bulk metallic glass matrix composites were fabricated by warm extrusion of a mixture of gas-atomized fully amorphous powders and ductile brass powders. After consolidation, the composite retained the fully amorphous matrix found in the gas-atomized powder combined with the brass second phase. The glass-transition and crystallization temperatures of the extruded material were the same as those of the starting powders. The confined ductile brass phase enabled the bulk metallic glass matrix composites to deform plastically under uniaxial compression at room temperature. The combination of strength and ductility in the inherently brittle Ni-based monolithic materials could be obtained by introducing a ductile phase in the bulk metallic glass matrix. However, control of the volume fraction and distribution of the ductile brass phase was important for the proper combination of the strength and plasticity.

Original languageEnglish
Pages (from-to)2101-2108
Number of pages8
JournalJournal of Materials Research
Issue number9
Publication statusPublished - 2003 Sept

Bibliographical note

Funding Information:
The work performed at the Center for Non-Crystalline Materials, Yonsei University, was supported by the Creative Research Initiatives of the Korean Ministry of Science and Technology. M.H. Lee is grateful for the support from the Brain Korea 21 project. The work performed at Ames Laboratory was supported by U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Science under Contract No. W-7405-ENG-82.

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering


Dive into the research topics of 'Synthesis of Ni-based bulk metallic glass matrix composites containing ductile brass phase by warm extrusion of gas atomized powders'. Together they form a unique fingerprint.

Cite this