Abstract
Acquiring indoor point cloud, using SLAM (Simultaneous Localization and Mapping) based mobile mapping system, is an element progress for development of as-build BIM (Building Information Model) for the maintenance of the building. In this research we proposed a simulation-based target geometry determination for extrinsic calibration of multiple 2D laser scanning mobile system. Four different types of calibration sites were designed: (1) circle type; (2) rectangle type; (3) double circle type; and (4) double rectangle type. Based on the measurement values obtained from each simulated calibration site geometry, least squares solution based extrinsic calibration was derived. As a result, the rectangle type geometry is most suitable for extrinsic calibration of this system. Also, correlation values between extrinsic calibration parameters were high, and calibration results were distinct according to the calibration sites.
| Original language | English |
|---|---|
| Pages (from-to) | 443-450 |
| Number of pages | 8 |
| Journal | Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography |
| Volume | 36 |
| Issue number | 6 |
| DOIs | |
| Publication status | Published - 2018 |
Bibliographical note
Publisher Copyright:© 2018 Korean Society of Surveying. All rights reserved.
All Science Journal Classification (ASJC) codes
- Earth and Planetary Sciences(all)