Residual stresses in a doubly clad fiber with depressed inner cladding (DIC)

Y. Park, K. Oh, U. C. Paek, D. Y. Kim, Charles R. Kurkjian

Research output: Contribution to journalArticlepeer-review

32 Citations (Scopus)


Thermal and mechanical stresses developed in concentric three-layered optical fiber-core, and inner and outer cladding, have been thoroughly studied for various concentrations of dopants and geometric structures. In order to examine the parametric results of thermal stresses in preforms, the stresses were measured with a polariscope. The results agreed well with the theoretical calculations. The thermal stresses were calculated for three temperature ranges in which the glass in each layer has a different thermal expansion coefficient. The mechanical stresses were studied considering the normal stress in the molten neck down region and its development with time. In order to include the time dependence of the stress below softening point, Maxwell's one dimensional viscoelasticity was applied. In a parametric study, the analyzes were carried out based on the fiber parameters such as relative index difference, ratio of clad to core, and depressed relative index difference. With an increase of core index above the silica, the thermal stresses in core increased linearly, but the depressed inner clad does not affect the stresses in core. From the parametric studies and modeling it was found that when the depressed inner cladding (DIC) layer has a large cross-section or high dopant concentration, the mechanical stress in core change from compression to tension.

Original languageEnglish
Pages (from-to)1823-1834
Number of pages12
JournalJournal of Lightwave Technology
Issue number10
Publication statusPublished - 1999 Oct

Bibliographical note

Funding Information:
Manuscript received February 8, 1999; revised June 29, 1999. This work was supported in part by the Korea Science and Engineering Foundation (KOSEF) through the Ultra-Fast Fiber Optic Network (UFON) research center at Kwangju Institute of Science and Technology and by Samsung electronics. Y. Park, K. Oh, U. C. Paek, and D. Y. Kim are with the Department of Information and Communications, Kwangju Institute of Science and Technology, Kwangju 500-714 Korea. C. R. Kurkjian is with Bellcore, Morristown, NJ 07962 USA. Publisher Item Identifier S 0733-8724(99)08004-4.

All Science Journal Classification (ASJC) codes

  • Atomic and Molecular Physics, and Optics


Dive into the research topics of 'Residual stresses in a doubly clad fiber with depressed inner cladding (DIC)'. Together they form a unique fingerprint.

Cite this