Polypyrrole decorated cellulose for energy storage applications

Sung Yeol Kim, Jinkee Hong, G. Tayhas R. Palmore

Research output: Contribution to journalLetterpeer-review

8 Citations (Scopus)


Polypyrrole-based electrodes were fabricated for energy storage applications using cellulose as a substrate material. Films of polypyrrole (pPy) were first coated on the cellulose via chemical polymerization using FeCl 3 as an oxidant. To further enhance the charge storage capacity, the resulting polypyrrole-cellulose composites (pPy/Cel) were coated with polypyrrole doped with anthraquinone-2,6-disulfonic acid (pPy[AQS]) via electropolymerization. The charge storage capacity was dependent on the amount of electropolymerized polypyrole, which could be controlled by the electropolymerization time. The cyclic voltammograms revealed that the charge storage capacities per geometric area (C/cm2) significantly increased and the gravimetric charge capacity increased from 125 C/g to 250 C/g after the electropolymerization. These increases were attributed to the redox activities of pPy and the dopant.

Original languageEnglish
Pages (from-to)1478-1481
Number of pages4
JournalSynthetic Metals
Issue number15-16
Publication statusPublished - 2012 Sept

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry


Dive into the research topics of 'Polypyrrole decorated cellulose for energy storage applications'. Together they form a unique fingerprint.

Cite this