Modeling of growing billet shape in spray forming process using scanning gas atomizer

Shinill Kang, Dong Hoon Chang, Eon Sik Lee

Research output: Contribution to journalArticlepeer-review


A numerical method is presented to predict and analyze the shape of a growing billet produced from the "spray forming" which is a fairly new near-net shape manufacturing process. It is important to understand the mechanism of billet growing because one can obtain a billet with the desired final shape without secondary operations by accurate control of the process, and it can also serve as a base for heat transfer and deformation analyses. The shape of a growing billet is determined by the flow rate of the alloy melt, the mode of nozzle scanning which is due to cam profile, the initial position of the spray nozzle, scanning angle, and the withdrawal speed of the substrate. In the present study, a theoretical model is first established to predict the shape of the billet and next the effects of the most dominant processing conditions, such as withdrawal speed of the substrate and the cam profile, on the shape of the growing billet are studied. Process conditions are obtained to produce a billet with uniform diameter and flat top surface, and an ASP30 high speed steel billet is manufactured using the same process conditions established from the simulation.

Original languageEnglish
Pages (from-to)507-514
Number of pages8
JournalAmerican Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED
Publication statusPublished - 1997

All Science Journal Classification (ASJC) codes

  • General Engineering


Dive into the research topics of 'Modeling of growing billet shape in spray forming process using scanning gas atomizer'. Together they form a unique fingerprint.

Cite this