In situ enhancement of toughness of SiC-TiB2 composites

Kyeong Sik Cho, Heon Jin Choi, June Gunn Lee, Young Wook Kim

Research output: Contribution to journalArticlepeer-review

31 Citations (Scopus)


A process based on liquid phase sintering and subsequent annealing for grain growth is presented to obtain the in situ enhancement of toughness of SiC-30 wt%, 50 wt%, and 70 wt% TiB2 composites. Its microstructures consist of uniformly distributed elongated α-SiC grains, relatively equiaxed TiB2 grains, and yttrium aluminium garnet (YAG) as a grain boundary phase. The composites were fabricated from β-SiC and TiB2 powders with the liquid forming additives of Al2O3 and Y2O3 by hot-pressing at 1850°C and subsequent annealing at 1950°C. The annealing led to the in situ growth of elongated α-SiC grains, due to the β → α phase transformation of SiC, and the coarsening of TiB2 grains. The fracture toughness of the SiC-50 wt% TiB2 composites after 6 h annealing was 7.3 MPa m1/2, approximately 60% higher than that of as-hot-pressed composites (4.5 MPa m1/2). Bridging and crack deflection by the elongated α-SiC grains and coarse TiB2 grains appear to account for the increased toughness of the composites.

Original languageEnglish
Pages (from-to)211-214
Number of pages4
JournalJournal of Materials Science
Issue number1
Publication statusPublished - 1998

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering


Dive into the research topics of 'In situ enhancement of toughness of SiC-TiB2 composites'. Together they form a unique fingerprint.

Cite this