Improvement of an asymmetric actuator for optical image stabilization

Myeong Gyu Song; No Cheol Park; Kyoung Su Park; Young Pil Park

doi:10.1007/s00542-011-1264-4

Improvement of an asymmetric actuator for optical image stabilization

Myeong Gyu Song, No Cheol Park, Kyoung Su Park, Young Pil Park

Department of Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

Abstract

This paper presents the improvement of an asymmetric actuator for optical image stabilization in a mobile phone camera. The required specification was defined from typical hand vibrations. The actuator was designed to have an asymmetric shape to reduce its size, but this design caused several problems. These problems were analyzed, and a new electromagnetic component design that solved these problems was proposed. Detailed dimensions of proposed design were obtained through the design of experiments procedure. Simulation results show that the final model exhibited sufficient performance to satisfy the required specification.

Original language	English
Pages (from-to)	1231-1241
Number of pages	11
Journal	Microsystem Technologies
Volume	17
Issue number	5-7
DOIs	https://doi.org/10.1007/s00542-011-1264-4
Publication status	Published - 2011 Jun

Bibliographical note

Funding Information:
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MEST) (No. 2010-0000769) and the Ministry of Knowledge Economy (MKE) granted funded by the Korea government (10035365).

All Science Journal Classification (ASJC) codes

Electronic, Optical and Magnetic Materials
Condensed Matter Physics
Hardware and Architecture
Electrical and Electronic Engineering

Access to Document

10.1007/s00542-011-1264-4

Cite this

@article{493c6a719c26402b8e7d2c3215f44e89,

title = "Improvement of an asymmetric actuator for optical image stabilization",

abstract = "This paper presents the improvement of an asymmetric actuator for optical image stabilization in a mobile phone camera. The required specification was defined from typical hand vibrations. The actuator was designed to have an asymmetric shape to reduce its size, but this design caused several problems. These problems were analyzed, and a new electromagnetic component design that solved these problems was proposed. Detailed dimensions of proposed design were obtained through the design of experiments procedure. Simulation results show that the final model exhibited sufficient performance to satisfy the required specification.",

author = "Song, {Myeong Gyu} and Park, {No Cheol} and Park, {Kyoung Su} and Park, {Young Pil}",

note = "Funding Information: This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MEST) (No. 2010-0000769) and the Ministry of Knowledge Economy (MKE) granted funded by the Korea government (10035365).",

year = "2011",

month = jun,

doi = "10.1007/s00542-011-1264-4",

language = "English",

volume = "17",

pages = "1231--1241",

journal = "Microsystem Technologies",

issn = "0946-7076",

publisher = "Springer Verlag",

number = "5-7",

}

TY - JOUR

T1 - Improvement of an asymmetric actuator for optical image stabilization

AU - Song, Myeong Gyu

AU - Park, No Cheol

AU - Park, Kyoung Su

AU - Park, Young Pil

N1 - Funding Information: This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MEST) (No. 2010-0000769) and the Ministry of Knowledge Economy (MKE) granted funded by the Korea government (10035365).

PY - 2011/6

Y1 - 2011/6

N2 - This paper presents the improvement of an asymmetric actuator for optical image stabilization in a mobile phone camera. The required specification was defined from typical hand vibrations. The actuator was designed to have an asymmetric shape to reduce its size, but this design caused several problems. These problems were analyzed, and a new electromagnetic component design that solved these problems was proposed. Detailed dimensions of proposed design were obtained through the design of experiments procedure. Simulation results show that the final model exhibited sufficient performance to satisfy the required specification.

AB - This paper presents the improvement of an asymmetric actuator for optical image stabilization in a mobile phone camera. The required specification was defined from typical hand vibrations. The actuator was designed to have an asymmetric shape to reduce its size, but this design caused several problems. These problems were analyzed, and a new electromagnetic component design that solved these problems was proposed. Detailed dimensions of proposed design were obtained through the design of experiments procedure. Simulation results show that the final model exhibited sufficient performance to satisfy the required specification.

UR - http://www.scopus.com/inward/record.url?scp=79958833591&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79958833591&partnerID=8YFLogxK

U2 - 10.1007/s00542-011-1264-4

DO - 10.1007/s00542-011-1264-4

M3 - Article

AN - SCOPUS:79958833591

SN - 0946-7076

VL - 17

SP - 1231

EP - 1241

JO - Microsystem Technologies

JF - Microsystem Technologies

IS - 5-7

ER -

Improvement of an asymmetric actuator for optical image stabilization

Abstract

Bibliographical note

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this