Experimental Results of an E-Field Probe Using Variable Resistors to Improve Performance

Sang Il Kwak; Jong Hwa Kwon; Young Joong Yoon

doi:10.1109/LAWP.2015.2510009

Experimental Results of an E-Field Probe Using Variable Resistors to Improve Performance

Sang Il Kwak, Jong Hwa Kwon, Young Joong Yoon

Department of Electrical and Electronic Engineering

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Abstract

In this letter, experimental results are shown for an E-field probe using variable chip resistor values to improve performance. The E-field probe consists of three small orthogonal dipoles with a diode and a lossy transmission line. Since the transmission line does not receive transmitted signals directly or indirectly, a high impedance value of the transmission line is required. To achieve such a high impedance value, chip resistors are inserted in the transmission line. In this letter, variable resistors are used in the transmission line to improve probe performance of such areas as sensitivity and isotropy. Finally, probes with identical and variable resistance values are fabricated, performance levels are measured, and characteristics are compared.

Original language	English
Article number	7360142
Pages (from-to)	1369-1372
Number of pages	4
Journal	IEEE Antennas and Wireless Propagation Letters
Volume	15
DOIs	https://doi.org/10.1109/LAWP.2015.2510009
Publication status	Published - 2016

Bibliographical note

Publisher Copyright:
© 2015 IEEE.

All Science Journal Classification (ASJC) codes

Electrical and Electronic Engineering

Access to Document

10.1109/LAWP.2015.2510009

Cite this

@article{6d0d5ea0af4d4151be08e9627f2ccdd1,

title = "Experimental Results of an E-Field Probe Using Variable Resistors to Improve Performance",

abstract = "In this letter, experimental results are shown for an E-field probe using variable chip resistor values to improve performance. The E-field probe consists of three small orthogonal dipoles with a diode and a lossy transmission line. Since the transmission line does not receive transmitted signals directly or indirectly, a high impedance value of the transmission line is required. To achieve such a high impedance value, chip resistors are inserted in the transmission line. In this letter, variable resistors are used in the transmission line to improve probe performance of such areas as sensitivity and isotropy. Finally, probes with identical and variable resistance values are fabricated, performance levels are measured, and characteristics are compared.",

author = "Kwak, {Sang Il} and Kwon, {Jong Hwa} and Yoon, {Young Joong}",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.",

year = "2016",

doi = "10.1109/LAWP.2015.2510009",

language = "English",

volume = "15",

pages = "1369--1372",

journal = "IEEE Antennas and Wireless Propagation Letters",

issn = "1536-1225",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - JOUR

T1 - Experimental Results of an E-Field Probe Using Variable Resistors to Improve Performance

AU - Kwak, Sang Il

AU - Kwon, Jong Hwa

AU - Yoon, Young Joong

PY - 2016

Y1 - 2016

N2 - In this letter, experimental results are shown for an E-field probe using variable chip resistor values to improve performance. The E-field probe consists of three small orthogonal dipoles with a diode and a lossy transmission line. Since the transmission line does not receive transmitted signals directly or indirectly, a high impedance value of the transmission line is required. To achieve such a high impedance value, chip resistors are inserted in the transmission line. In this letter, variable resistors are used in the transmission line to improve probe performance of such areas as sensitivity and isotropy. Finally, probes with identical and variable resistance values are fabricated, performance levels are measured, and characteristics are compared.

AB - In this letter, experimental results are shown for an E-field probe using variable chip resistor values to improve performance. The E-field probe consists of three small orthogonal dipoles with a diode and a lossy transmission line. Since the transmission line does not receive transmitted signals directly or indirectly, a high impedance value of the transmission line is required. To achieve such a high impedance value, chip resistors are inserted in the transmission line. In this letter, variable resistors are used in the transmission line to improve probe performance of such areas as sensitivity and isotropy. Finally, probes with identical and variable resistance values are fabricated, performance levels are measured, and characteristics are compared.

UR - http://www.scopus.com/inward/record.url?scp=84964903492&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84964903492&partnerID=8YFLogxK

U2 - 10.1109/LAWP.2015.2510009

DO - 10.1109/LAWP.2015.2510009

M3 - Article

AN - SCOPUS:84964903492

SN - 1536-1225

VL - 15

SP - 1369

EP - 1372

JO - IEEE Antennas and Wireless Propagation Letters

JF - IEEE Antennas and Wireless Propagation Letters

M1 - 7360142

ER -

Experimental Results of an E-Field Probe Using Variable Resistors to Improve Performance

Abstract

Bibliographical note

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this