Evaluation of non-failure operation time of power system elements in virtual test bed environment via time-frequency analysis

Gennady Balim; Vladimir Lyashev; Vadim Popov; Yong June Shin; Roger Dougal

doi:10.1109/IMTC.2002.1006933

Evaluation of non-failure operation time of power system elements in virtual test bed environment via time-frequency analysis

Gennady Balim, Vladimir Lyashev, Vadim Popov, Yong June Shin, Roger Dougal

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Abstract

A new methodology for the evaluation of non-failure operating time (NFOT) in Virtual Test Bed Environment is proposed. The proposed method is featured by the application of signal processing techniques to estimate parameters of reliability at the earliest steps of design based on intercoupling 1/f noise and reliability of power system elements. The proposed approach enables one to directly quantify the reliability of the system by the investigation of the physical properties of the nonequilibrium fluctuation.

Original language	English
Title of host publication	IMTC'05 - Proceedings of the IEEE Instrumentation and Measurement Technology Conference
Pages	737-741
Number of pages	5
DOIs	https://doi.org/10.1109/IMTC.2002.1006933
Publication status	Published - 2005
Event	IMTC'05 - Proceedings of the IEEE Instrumentation and Measurement Technology Conference - Ottawa, ON, Canada Duration: 2005 May 16 → 2005 May 19

Publication series

Name	Conference Record - IEEE Instrumentation and Measurement Technology Conference
Volume	1
ISSN (Print)	1091-5281

Other

Other	IMTC'05 - Proceedings of the IEEE Instrumentation and Measurement Technology Conference
Country/Territory	Canada
City	Ottawa, ON
Period	05/5/16 → 05/5/19

All Science Journal Classification (ASJC) codes

Electrical and Electronic Engineering

Access to Document

10.1109/IMTC.2002.1006933

Cite this

Balim, G., Lyashev, V., Popov, V., Shin, Y. J., & Dougal, R. (2005). Evaluation of non-failure operation time of power system elements in virtual test bed environment via time-frequency analysis. In IMTC'05 - Proceedings of the IEEE Instrumentation and Measurement Technology Conference (pp. 737-741). Article 1604215 (Conference Record - IEEE Instrumentation and Measurement Technology Conference; Vol. 1). https://doi.org/10.1109/IMTC.2002.1006933

Balim, Gennady ; Lyashev, Vladimir ; Popov, Vadim et al. / Evaluation of non-failure operation time of power system elements in virtual test bed environment via time-frequency analysis. IMTC'05 - Proceedings of the IEEE Instrumentation and Measurement Technology Conference. 2005. pp. 737-741 (Conference Record - IEEE Instrumentation and Measurement Technology Conference).

@inproceedings{080804a0b2ff46e39cf17e0542ef7166,

title = "Evaluation of non-failure operation time of power system elements in virtual test bed environment via time-frequency analysis",

abstract = "A new methodology for the evaluation of non-failure operating time (NFOT) in Virtual Test Bed Environment is proposed. The proposed method is featured by the application of signal processing techniques to estimate parameters of reliability at the earliest steps of design based on intercoupling 1/f noise and reliability of power system elements. The proposed approach enables one to directly quantify the reliability of the system by the investigation of the physical properties of the nonequilibrium fluctuation.",

keywords = "1/f noise, Circuit simulation, Hardware's reliability, Nonequilibrium fluctuations, Time-frequency analysis",

author = "Gennady Balim and Vladimir Lyashev and Vadim Popov and Shin, {Yong June} and Roger Dougal",

year = "2005",

doi = "10.1109/IMTC.2002.1006933",

language = "English",

isbn = "0780372182",

series = "Conference Record - IEEE Instrumentation and Measurement Technology Conference",

pages = "737--741",

booktitle = "IMTC'05 - Proceedings of the IEEE Instrumentation and Measurement Technology Conference",

note = "IMTC'05 - Proceedings of the IEEE Instrumentation and Measurement Technology Conference ; Conference date: 16-05-2005 Through 19-05-2005",

}

Balim, G, Lyashev, V, Popov, V, Shin, YJ & Dougal, R 2005, Evaluation of non-failure operation time of power system elements in virtual test bed environment via time-frequency analysis. in IMTC'05 - Proceedings of the IEEE Instrumentation and Measurement Technology Conference., 1604215, Conference Record - IEEE Instrumentation and Measurement Technology Conference, vol. 1, pp. 737-741, IMTC'05 - Proceedings of the IEEE Instrumentation and Measurement Technology Conference, Ottawa, ON, Canada, 05/5/16. https://doi.org/10.1109/IMTC.2002.1006933

Evaluation of non-failure operation time of power system elements in virtual test bed environment via time-frequency analysis. / Balim, Gennady; Lyashev, Vladimir; Popov, Vadim et al.
IMTC'05 - Proceedings of the IEEE Instrumentation and Measurement Technology Conference. 2005. p. 737-741 1604215 (Conference Record - IEEE Instrumentation and Measurement Technology Conference; Vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Evaluation of non-failure operation time of power system elements in virtual test bed environment via time-frequency analysis

AU - Balim, Gennady

AU - Lyashev, Vladimir

AU - Popov, Vadim

AU - Shin, Yong June

AU - Dougal, Roger

PY - 2005

Y1 - 2005

N2 - A new methodology for the evaluation of non-failure operating time (NFOT) in Virtual Test Bed Environment is proposed. The proposed method is featured by the application of signal processing techniques to estimate parameters of reliability at the earliest steps of design based on intercoupling 1/f noise and reliability of power system elements. The proposed approach enables one to directly quantify the reliability of the system by the investigation of the physical properties of the nonequilibrium fluctuation.

AB - A new methodology for the evaluation of non-failure operating time (NFOT) in Virtual Test Bed Environment is proposed. The proposed method is featured by the application of signal processing techniques to estimate parameters of reliability at the earliest steps of design based on intercoupling 1/f noise and reliability of power system elements. The proposed approach enables one to directly quantify the reliability of the system by the investigation of the physical properties of the nonequilibrium fluctuation.

KW - 1/f noise

KW - Circuit simulation

KW - Hardware's reliability

KW - Nonequilibrium fluctuations

KW - Time-frequency analysis

UR - http://www.scopus.com/inward/record.url?scp=33847237673&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33847237673&partnerID=8YFLogxK

U2 - 10.1109/IMTC.2002.1006933

DO - 10.1109/IMTC.2002.1006933

M3 - Conference contribution

AN - SCOPUS:33847237673

SN - 0780372182

SN - 0780388798

SN - 9780780388796

T3 - Conference Record - IEEE Instrumentation and Measurement Technology Conference

SP - 737

EP - 741

BT - IMTC'05 - Proceedings of the IEEE Instrumentation and Measurement Technology Conference

T2 - IMTC'05 - Proceedings of the IEEE Instrumentation and Measurement Technology Conference

Y2 - 16 May 2005 through 19 May 2005

ER -

Balim G, Lyashev V, Popov V, Shin YJ, Dougal R. Evaluation of non-failure operation time of power system elements in virtual test bed environment via time-frequency analysis. In IMTC'05 - Proceedings of the IEEE Instrumentation and Measurement Technology Conference. 2005. p. 737-741. 1604215. (Conference Record - IEEE Instrumentation and Measurement Technology Conference). doi: 10.1109/IMTC.2002.1006933

Evaluation of non-failure operation time of power system elements in virtual test bed environment via time-frequency analysis

Abstract

Publication series

Other

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this