Electro-optical characteristics of the ion-beam-aligned FFS mode on the new a-C:H thin film

Jeoung Yeon Hwang; Hyung Ku Kang; Dae Shik Seo; Young Haik Jeong; Han Jin Ahn; Hong Koo Baik

doi:10.1889/1.2720325

Electro-optical characteristics of the ion-beam-aligned FFS mode on the new a-C:H thin film

Jeoung Yeon Hwang, Hyung Ku Kang, Dae Shik Seo, Young Haik Jeong, Han Jin Ahn, Hong Koo Baik

Research output: Contribution to journal › Conference article › peer-review

Abstract

In this paper, we intend to make FFS (Fringe-Field Switching) mode cell with LC alignment by using non-rubbing method, ion beam(IB) alignment method on the new a-C:H thin film, to analyze electro-optical characteristics in this cell. We studied on the suitable inorganic thin film for FFS-LCD and the aligning capabilities of nematic liquid crystal (NLC) by using the new alignment material of the a-C:H thin film as working gas at rf bias condition. A high pretilt angle of about 5° by IB exposure on the new a-C:H thin film was measured. An excellent voltage-transmittance (V-T) and response time curve of the IB-aligned FFS-LCD were observed with oblique ion beam exposure on the new a-C:H thin films.

Original language	English
Article number	P-123
Pages (from-to)	768-771
Number of pages	4
Journal	Digest of Technical Papers - SID International Symposium
Volume	36
Issue number	1
DOIs	https://doi.org/10.1889/1.2720325
Publication status	Published - 2005
Event	SID Symposium Digest of Technical Papers - Boston, MA, United States Duration: 2004 Jul 29 → 2004 Jul 29

All Science Journal Classification (ASJC) codes

Engineering(all)

Access to Document

10.1889/1.2720325

Cite this

@article{623b0d2bd6664880b592a0c7a544f3d9,

title = "Electro-optical characteristics of the ion-beam-aligned FFS mode on the new a-C:H thin film",

abstract = "In this paper, we intend to make FFS (Fringe-Field Switching) mode cell with LC alignment by using non-rubbing method, ion beam(IB) alignment method on the new a-C:H thin film, to analyze electro-optical characteristics in this cell. We studied on the suitable inorganic thin film for FFS-LCD and the aligning capabilities of nematic liquid crystal (NLC) by using the new alignment material of the a-C:H thin film as working gas at rf bias condition. A high pretilt angle of about 5° by IB exposure on the new a-C:H thin film was measured. An excellent voltage-transmittance (V-T) and response time curve of the IB-aligned FFS-LCD were observed with oblique ion beam exposure on the new a-C:H thin films.",

author = "Hwang, {Jeoung Yeon} and Kang, {Hyung Ku} and Seo, {Dae Shik} and Jeong, {Young Haik} and Ahn, {Han Jin} and Baik, {Hong Koo}",

year = "2005",

doi = "10.1889/1.2720325",

language = "English",

volume = "36",

pages = "768--771",

journal = "Digest of Technical Papers - SID International Symposium",

issn = "0097-966X",

number = "1",

note = "SID Symposium Digest of Technical Papers ; Conference date: 29-07-2004 Through 29-07-2004",

}

TY - JOUR

T1 - Electro-optical characteristics of the ion-beam-aligned FFS mode on the new a-C:H thin film

AU - Hwang, Jeoung Yeon

AU - Kang, Hyung Ku

AU - Seo, Dae Shik

AU - Jeong, Young Haik

AU - Ahn, Han Jin

AU - Baik, Hong Koo

PY - 2005

Y1 - 2005

N2 - In this paper, we intend to make FFS (Fringe-Field Switching) mode cell with LC alignment by using non-rubbing method, ion beam(IB) alignment method on the new a-C:H thin film, to analyze electro-optical characteristics in this cell. We studied on the suitable inorganic thin film for FFS-LCD and the aligning capabilities of nematic liquid crystal (NLC) by using the new alignment material of the a-C:H thin film as working gas at rf bias condition. A high pretilt angle of about 5° by IB exposure on the new a-C:H thin film was measured. An excellent voltage-transmittance (V-T) and response time curve of the IB-aligned FFS-LCD were observed with oblique ion beam exposure on the new a-C:H thin films.

AB - In this paper, we intend to make FFS (Fringe-Field Switching) mode cell with LC alignment by using non-rubbing method, ion beam(IB) alignment method on the new a-C:H thin film, to analyze electro-optical characteristics in this cell. We studied on the suitable inorganic thin film for FFS-LCD and the aligning capabilities of nematic liquid crystal (NLC) by using the new alignment material of the a-C:H thin film as working gas at rf bias condition. A high pretilt angle of about 5° by IB exposure on the new a-C:H thin film was measured. An excellent voltage-transmittance (V-T) and response time curve of the IB-aligned FFS-LCD were observed with oblique ion beam exposure on the new a-C:H thin films.

UR - http://www.scopus.com/inward/record.url?scp=32144458435&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=32144458435&partnerID=8YFLogxK

U2 - 10.1889/1.2720325

DO - 10.1889/1.2720325

M3 - Conference article

AN - SCOPUS:32144458435

SN - 0097-966X

VL - 36

SP - 768

EP - 771

JO - Digest of Technical Papers - SID International Symposium

JF - Digest of Technical Papers - SID International Symposium

IS - 1

M1 - P-123

T2 - SID Symposium Digest of Technical Papers

Y2 - 29 July 2004 through 29 July 2004

ER -

Electro-optical characteristics of the ion-beam-aligned FFS mode on the new a-C:H thin film

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this