Abstract
Integrated planar solid oxide fuel cell (IP-SOFC) with multilayered structure has been fabricated via direct-writing process named robo-dispensing. Partially stabilized zirconia (PSZ) substrate with sufficient mechanical strength and gas permeability was utilized as a support for SOFC. The 2-cells serially integrated planar SOFC in which each cell is composed of the line-shaped electrode and electrolyte was produced The SOFC component paste materials were dispensed through cylindrical nozzle of 0.21 mm in diameter onto a moving plate that was controlled by robo-dispensing machine. The thicknesses of anode, electrolyte and cathode were 30 μm, 15 μm and 20 μm, respectively. The fabricated IP-SOFC exhibited OCV of 1.82 V and maximum power density of 35 mW.
| Original language | English |
|---|---|
| Pages (from-to) | 683-687 |
| Number of pages | 5 |
| Journal | Journal of Electroceramics |
| Volume | 17 |
| Issue number | 2-4 |
| DOIs | |
| Publication status | Published - 2006 Dec |
Bibliographical note
Funding Information:Acknowledgment This research was supported in part by Grant No. 2003-N-FC03-P-06-0-000 from the Korea Energy Management Corporation. It was also partially supported by National Research Laboratory (NRL) Program from Korea Science and Engineering Foundation.
All Science Journal Classification (ASJC) codes
- Electronic, Optical and Magnetic Materials
- Ceramics and Composites
- Condensed Matter Physics
- Mechanics of Materials
- Electrical and Electronic Engineering
- Materials Chemistry