Corrigendum to “Thermal boundary conditions in sliding contact problem’’ [Tribol. Int. 103 (2016) 69–72] (Tribology International, (S0301679X16301992), (10.1016/j.triboint.2016.06.028))

Yongwoo Lee; Yuwei Liu; J. R. Barber; Yong Hoon Jang

doi:10.1016/j.triboint.2016.11.043

Corrigendum to “Thermal boundary conditions in sliding contact problem’’ [Tribol. Int. 103 (2016) 69–72] (Tribology International, (S0301679X16301992), (10.1016/j.triboint.2016.06.028))

Yongwoo Lee, Yuwei Liu, J. R. Barber, Yong Hoon Jang

Department of Mechanical Engineering

Research output: Contribution to journal › Comment/debate › peer-review

Abstract

The authors regret to announce that they have discovered some significant errors in this paper as detailed below. 1. Eqs. (11), (12) and (14) should appear as follows: [Formula presented] where [Formula presented].” 4. Eq. (24) should read: [Formula presented] should have appeared as follows [Formula presented] The authors apologize for any inconvenience caused to readers.

Original language	English
Pages (from-to)	640
Number of pages	1
Journal	Tribology International
Volume	115
DOIs	https://doi.org/10.1016/j.triboint.2016.11.043
Publication status	Published - 2017 Nov

Bibliographical note

Publisher Copyright:
© 2016 Elsevier Ltd

All Science Journal Classification (ASJC) codes

Mechanics of Materials
Mechanical Engineering
Surfaces and Interfaces
Surfaces, Coatings and Films

Access to Document

10.1016/j.triboint.2016.11.043

Cite this

@article{bb8ba7454b41481cafc26ed9b9c7ab51,

title = "Corrigendum to “Thermal boundary conditions in sliding contact problem{\textquoteright}{\textquoteright} [Tribol. Int. 103 (2016) 69–72] (Tribology International, (S0301679X16301992), (10.1016/j.triboint.2016.06.028))",

abstract = "The authors regret to announce that they have discovered some significant errors in this paper as detailed below. 1. Eqs. (11), (12) and (14) should appear as follows: [Formula presented] where [Formula presented].” 4. Eq. (24) should read: [Formula presented] should have appeared as follows [Formula presented] The authors apologize for any inconvenience caused to readers.",

author = "Yongwoo Lee and Yuwei Liu and Barber, {J. R.} and Jang, {Yong Hoon}",

note = "Publisher Copyright: {\textcopyright} 2016 Elsevier Ltd",

year = "2017",

month = nov,

doi = "10.1016/j.triboint.2016.11.043",

language = "English",

volume = "115",

pages = "640",

journal = "Tribology International",

issn = "0301-679X",

publisher = "Elsevier Inc.",

}

Corrigendum to “Thermal boundary conditions in sliding contact problem’’ [Tribol. Int. 103 (2016) 69–72] (Tribology International, (S0301679X16301992), (10.1016/j.triboint.2016.06.028)). / Lee, Yongwoo; Liu, Yuwei; Barber, J. R. et al.
In: Tribology International, Vol. 115, 11.2017, p. 640.

Research output: Contribution to journal › Comment/debate › peer-review

TY - JOUR

T1 - Corrigendum to “Thermal boundary conditions in sliding contact problem’’ [Tribol. Int. 103 (2016) 69–72] (Tribology International, (S0301679X16301992), (10.1016/j.triboint.2016.06.028))

AU - Lee, Yongwoo

AU - Liu, Yuwei

AU - Barber, J. R.

AU - Jang, Yong Hoon

PY - 2017/11

Y1 - 2017/11

N2 - The authors regret to announce that they have discovered some significant errors in this paper as detailed below. 1. Eqs. (11), (12) and (14) should appear as follows: [Formula presented] where [Formula presented].” 4. Eq. (24) should read: [Formula presented] should have appeared as follows [Formula presented] The authors apologize for any inconvenience caused to readers.

AB - The authors regret to announce that they have discovered some significant errors in this paper as detailed below. 1. Eqs. (11), (12) and (14) should appear as follows: [Formula presented] where [Formula presented].” 4. Eq. (24) should read: [Formula presented] should have appeared as follows [Formula presented] The authors apologize for any inconvenience caused to readers.

UR - http://www.scopus.com/inward/record.url?scp=85007578352&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85007578352&partnerID=8YFLogxK

U2 - 10.1016/j.triboint.2016.11.043

DO - 10.1016/j.triboint.2016.11.043

M3 - Comment/debate

AN - SCOPUS:85007578352

SN - 0301-679X

VL - 115

SP - 640

JO - Tribology International

JF - Tribology International

ER -

Corrigendum to “Thermal boundary conditions in sliding contact problem’’ [Tribol. Int. 103 (2016) 69–72] (Tribology International, (S0301679X16301992), (10.1016/j.triboint.2016.06.028))

Abstract

Bibliographical note

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this