Comparative analysis of MCU memory for IoT application

Sunghwan Joo; Young Jae An; Tae Woo Oh; Seong Ook Jung

doi:10.23919/ELINFOCOM.2018.8330720

Comparative analysis of MCU memory for IoT application

Sunghwan Joo, Young Jae An, Tae Woo Oh, Seong Ook Jung

Department of Electrical and Electronic Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

6 Citations (Scopus)

Abstract

Low power consumption is very important for Internet of Things (IoT) for achieving long lifetime. On the other hand, non-volatile memory such as Flash memory or Ferroelectronic Random Access Memory (FRAM) has been commercially produced for power reduction in micro control unit (MCU). In this paper, the MCU based on the Flash and FRAM are compared and analyzed in terms of power through IoT implementation. For practical analysis, heating, ventilation, and air conditioning (HVAC) is implemented and measured based on MCU. From measurement results, the time and power consumption of shutdown and wakeup are important as that of the active and standby.

Original language	English
Title of host publication	International Conference on Electronics, Information and Communication, ICEIC 2018
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	1-3
Number of pages	3
ISBN (Electronic)	9781538647547
DOIs	https://doi.org/10.23919/ELINFOCOM.2018.8330720
Publication status	Published - 2018 Apr 2
Event	17th International Conference on Electronics, Information and Communication, ICEIC 2018 - Honolulu, United States Duration: 2018 Jan 24 → 2018 Jan 27

Publication series

Name	International Conference on Electronics, Information and Communication, ICEIC 2018
Volume	2018-January

Other

Other	17th International Conference on Electronics, Information and Communication, ICEIC 2018
Country/Territory	United States
City	Honolulu
Period	18/1/24 → 18/1/27

Bibliographical note

Publisher Copyright:
© 2018 Institute of Electronics and Information Engineers.

All Science Journal Classification (ASJC) codes

Information Systems
Computer Networks and Communications
Computer Science Applications
Signal Processing
Electrical and Electronic Engineering

Access to Document

10.23919/ELINFOCOM.2018.8330720

Cite this

Joo, S., An, Y. J., Oh, T. W., & Jung, S. O. (2018). Comparative analysis of MCU memory for IoT application. In International Conference on Electronics, Information and Communication, ICEIC 2018 (pp. 1-3). (International Conference on Electronics, Information and Communication, ICEIC 2018; Vol. 2018-January). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.23919/ELINFOCOM.2018.8330720

@inproceedings{7027d89620e3405e9f835f7d619e2a9d,

title = "Comparative analysis of MCU memory for IoT application",

abstract = "Low power consumption is very important for Internet of Things (IoT) for achieving long lifetime. On the other hand, non-volatile memory such as Flash memory or Ferroelectronic Random Access Memory (FRAM) has been commercially produced for power reduction in micro control unit (MCU). In this paper, the MCU based on the Flash and FRAM are compared and analyzed in terms of power through IoT implementation. For practical analysis, heating, ventilation, and air conditioning (HVAC) is implemented and measured based on MCU. From measurement results, the time and power consumption of shutdown and wakeup are important as that of the active and standby.",

keywords = "Ferroelectronic Random Access Memory (FRAM), Flash, HVAC, Internet of Things (IoT), MSP430, micro controller unit (MCU)",

author = "Sunghwan Joo and An, {Young Jae} and Oh, {Tae Woo} and Jung, {Seong Ook}",

note = "Publisher Copyright: {\textcopyright} 2018 Institute of Electronics and Information Engineers.; 17th International Conference on Electronics, Information and Communication, ICEIC 2018 ; Conference date: 24-01-2018 Through 27-01-2018",

year = "2018",

month = apr,

day = "2",

doi = "10.23919/ELINFOCOM.2018.8330720",

language = "English",

series = "International Conference on Electronics, Information and Communication, ICEIC 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "1--3",

booktitle = "International Conference on Electronics, Information and Communication, ICEIC 2018",

address = "United States",

}

Joo, S, An, YJ, Oh, TW & Jung, SO 2018, Comparative analysis of MCU memory for IoT application. in International Conference on Electronics, Information and Communication, ICEIC 2018. International Conference on Electronics, Information and Communication, ICEIC 2018, vol. 2018-January, Institute of Electrical and Electronics Engineers Inc., pp. 1-3, 17th International Conference on Electronics, Information and Communication, ICEIC 2018, Honolulu, United States, 18/1/24. https://doi.org/10.23919/ELINFOCOM.2018.8330720

Comparative analysis of MCU memory for IoT application. / Joo, Sunghwan; An, Young Jae; Oh, Tae Woo et al.
International Conference on Electronics, Information and Communication, ICEIC 2018. Institute of Electrical and Electronics Engineers Inc., 2018. p. 1-3 (International Conference on Electronics, Information and Communication, ICEIC 2018; Vol. 2018-January).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Comparative analysis of MCU memory for IoT application

AU - Joo, Sunghwan

AU - An, Young Jae

AU - Oh, Tae Woo

AU - Jung, Seong Ook

PY - 2018/4/2

Y1 - 2018/4/2

N2 - Low power consumption is very important for Internet of Things (IoT) for achieving long lifetime. On the other hand, non-volatile memory such as Flash memory or Ferroelectronic Random Access Memory (FRAM) has been commercially produced for power reduction in micro control unit (MCU). In this paper, the MCU based on the Flash and FRAM are compared and analyzed in terms of power through IoT implementation. For practical analysis, heating, ventilation, and air conditioning (HVAC) is implemented and measured based on MCU. From measurement results, the time and power consumption of shutdown and wakeup are important as that of the active and standby.

AB - Low power consumption is very important for Internet of Things (IoT) for achieving long lifetime. On the other hand, non-volatile memory such as Flash memory or Ferroelectronic Random Access Memory (FRAM) has been commercially produced for power reduction in micro control unit (MCU). In this paper, the MCU based on the Flash and FRAM are compared and analyzed in terms of power through IoT implementation. For practical analysis, heating, ventilation, and air conditioning (HVAC) is implemented and measured based on MCU. From measurement results, the time and power consumption of shutdown and wakeup are important as that of the active and standby.

KW - Ferroelectronic Random Access Memory (FRAM)

KW - Flash

KW - HVAC

KW - Internet of Things (IoT)

KW - MSP430

KW - micro controller unit (MCU)

UR - http://www.scopus.com/inward/record.url?scp=85048596547&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85048596547&partnerID=8YFLogxK

U2 - 10.23919/ELINFOCOM.2018.8330720

DO - 10.23919/ELINFOCOM.2018.8330720

M3 - Conference contribution

AN - SCOPUS:85048596547

T3 - International Conference on Electronics, Information and Communication, ICEIC 2018

SP - 1

EP - 3

BT - International Conference on Electronics, Information and Communication, ICEIC 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 17th International Conference on Electronics, Information and Communication, ICEIC 2018

Y2 - 24 January 2018 through 27 January 2018

ER -

Comparative analysis of MCU memory for IoT application

Abstract

Publication series

Other

Bibliographical note

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this