Characteristic analysis of HTS magnet charging system combined with PV system using MPPT control

Dae Wook Kim; Yong Soo Yoon; Yoon Do Chung; Hyun Chul Jo; Ho Min Kim; Tae Jung Kim; Jae Gi Oh; Tae Kuk Ko

doi:10.9714/psac.2012.14.1.008

Characteristic analysis of HTS magnet charging system combined with PV system using MPPT control

Dae Wook Kim, Yong Soo Yoon, Yoon Do Chung, Hyun Chul Jo, Ho Min Kim, Tae Jung Kim, Jae Gi Oh, Tae Kuk Ko

Department of Electrical and Electronic Engineering

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Abstract

We already fabricated a proto-type HTS charging system with photovoltaic (PV) system and obtained design parameters for DC converter and HTS charging system. In order to develop the real scale charging system efficiently, we suggested a maximum power point tracking (MPPT) controller using a perturb and observe (P&O) MPPT algorithm for PV system. In this paper, we designed and simulated the MPPT controller for the real scale HTS charging system. As well as, the PV module has been analyzed by solving solar cell equivalent equations. The simulated and theoretical results presented here are being considered the next study which addresses the design and fabrication parameters.

Original language	English
Pages (from-to)	8-13
Number of pages	6
Journal	Journal of the Korea Institute of Applied Superconductivity and Cryogenics
Volume	14
Issue number	1
DOIs	https://doi.org/10.9714/psac.2012.14.1.008
Publication status	Published - 2012 Mar

All Science Journal Classification (ASJC) codes

Electronic, Optical and Magnetic Materials
Electrical and Electronic Engineering

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.9714/psac.2012.14.1.008

Cite this

@article{8fc67c5bacb0441fbe396ccf3c3b8849,

title = "Characteristic analysis of HTS magnet charging system combined with PV system using MPPT control",

abstract = "We already fabricated a proto-type HTS charging system with photovoltaic (PV) system and obtained design parameters for DC converter and HTS charging system. In order to develop the real scale charging system efficiently, we suggested a maximum power point tracking (MPPT) controller using a perturb and observe (P&O) MPPT algorithm for PV system. In this paper, we designed and simulated the MPPT controller for the real scale HTS charging system. As well as, the PV module has been analyzed by solving solar cell equivalent equations. The simulated and theoretical results presented here are being considered the next study which addresses the design and fabrication parameters.",

author = "Kim, {Dae Wook} and Yoon, {Yong Soo} and Chung, {Yoon Do} and Jo, {Hyun Chul} and Kim, {Ho Min} and Kim, {Tae Jung} and Oh, {Jae Gi} and Ko, {Tae Kuk}",

year = "2012",

month = mar,

doi = "10.9714/psac.2012.14.1.008",

language = "English",

volume = "14",

pages = "8--13",

journal = "Journal of the Korea Institute of Applied Superconductivity and Cryogenics",

issn = "1229-3008",

publisher = "Korea Institute of Applied Superconductivity and Cryogenics",

number = "1",

}

TY - JOUR

T1 - Characteristic analysis of HTS magnet charging system combined with PV system using MPPT control

AU - Kim, Dae Wook

AU - Yoon, Yong Soo

AU - Chung, Yoon Do

AU - Jo, Hyun Chul

AU - Kim, Ho Min

AU - Kim, Tae Jung

AU - Oh, Jae Gi

AU - Ko, Tae Kuk

PY - 2012/3

Y1 - 2012/3

N2 - We already fabricated a proto-type HTS charging system with photovoltaic (PV) system and obtained design parameters for DC converter and HTS charging system. In order to develop the real scale charging system efficiently, we suggested a maximum power point tracking (MPPT) controller using a perturb and observe (P&O) MPPT algorithm for PV system. In this paper, we designed and simulated the MPPT controller for the real scale HTS charging system. As well as, the PV module has been analyzed by solving solar cell equivalent equations. The simulated and theoretical results presented here are being considered the next study which addresses the design and fabrication parameters.

AB - We already fabricated a proto-type HTS charging system with photovoltaic (PV) system and obtained design parameters for DC converter and HTS charging system. In order to develop the real scale charging system efficiently, we suggested a maximum power point tracking (MPPT) controller using a perturb and observe (P&O) MPPT algorithm for PV system. In this paper, we designed and simulated the MPPT controller for the real scale HTS charging system. As well as, the PV module has been analyzed by solving solar cell equivalent equations. The simulated and theoretical results presented here are being considered the next study which addresses the design and fabrication parameters.

UR - http://www.scopus.com/inward/record.url?scp=84863943385&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84863943385&partnerID=8YFLogxK

U2 - 10.9714/psac.2012.14.1.008

DO - 10.9714/psac.2012.14.1.008

M3 - Article

AN - SCOPUS:84863943385

SN - 1229-3008

VL - 14

SP - 8

EP - 13

JO - Journal of the Korea Institute of Applied Superconductivity and Cryogenics

JF - Journal of the Korea Institute of Applied Superconductivity and Cryogenics

IS - 1

ER -

Characteristic analysis of HTS magnet charging system combined with PV system using MPPT control

Abstract

All Science Journal Classification (ASJC) codes

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this