In this study, air-blown gasification of biomass in a bubbling fluidized bed (BFB) gasifier was numerically investigated. A discrete element model coupled with computational fluid dynamics (CFD-DEM), in which gas is considered as continuum and particle is considered as discrete phase, was employed. The flow characteristics of the BFB were discussed and compared with the reported experimental data. Then, the gasification performance of the BFB was discussed for cases with varying fluidization number (FN) values at a constant equivalence ratio (ER). In a parametric study, calculations were performed for various FN values, and the ER value was fixed as 0.27. The formation of CO2 commenced inside the fluidized bed region for FN values exceeding 3.6. When the FN value increased, slight decreases were observed in the CO and H2 concentrations as well as CCE. Thus, an increase in FN beyond a certain value was not recommended. Another parametric study was performed for various combinations of FN & ER values. The CGE increased for FN & ER values between 2.49 & 0.21 and 3.56 & 0.3, whereas it decreased for FN & ER values exceeding 3.56 & 0.3. Therefore, the optimum FN & ER values were considered as 3.56 & 0.3.
Bibliographical noteFunding Information:
This work was supported by the Korea Institute of Energy Technology Evaluation and Planning ( KETEP ) and the Ministry of Trade, Industry & Energy ( MOTIE ) of the Republic of Korea (No. 20193010093000 ).
© 2020 Elsevier Ltd
All Science Journal Classification (ASJC) codes
- Civil and Structural Engineering
- Modelling and Simulation
- Renewable Energy, Sustainability and the Environment
- Building and Construction
- Fuel Technology
- Energy Engineering and Power Technology
- Mechanical Engineering
- Management, Monitoring, Policy and Law
- Industrial and Manufacturing Engineering
- Electrical and Electronic Engineering