Build-up virtual laboratory for reinforced concrete structures to enhance understanding design requirements

Young Kwang Hwang; John E. Bolander; Adeba Abera Deressa; Yun Mook Lim

doi:10.1109/ICL.2015.7318048

Build-up virtual laboratory for reinforced concrete structures to enhance understanding design requirements

Young Kwang Hwang, John E. Bolander, Adeba Abera Deressa, Yun Mook Lim

Department of Civil and Environmental Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Abstract

In this paper, we are trying to provide a simulation tool to find the different failure behavior of reinforced concrete (RC) structures with various design conditions. For example, design code asked designers/students to make distribution of re-bars for several numbers rather than one re-bar in the designed beam. Students can estimate the total amount of reinforcement cross sectional area by simple calculation, but students have to distribute the total amount area of re-bars to several numbers of re-bars with small diameter. In this requirement of the code, the students who learn RC structure design at the beginning stage are not easy to understand from theoretical point of view. However, they can easily learn, if they have hands on experience like real experiments or numerical simulations. Here, the real experiments for RC structures are required a lot of time and cost. Therefore, if a realistic simulation tool, so-called 'Virtual RC Structure Lab', is provided for engineering educational purpose, students could have a chance to learn from virtual hands on experience for RC structure design.

Original language	English
Title of host publication	Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	330-333
Number of pages	4
ISBN (Electronic)	9781479987078
DOIs	https://doi.org/10.1109/ICL.2015.7318048
Publication status	Published - 2015 Nov 4
Event	International Conference on Interactive Collaborative Learning, ICL 2015 - Firenze, Italy Duration: 2015 Sept 20 → 2015 Sept 24

Publication series

Name	Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015

Other

Other	International Conference on Interactive Collaborative Learning, ICL 2015
Country/Territory	Italy
City	Firenze
Period	15/9/20 → 15/9/24

Bibliographical note

Publisher Copyright:
© 2015 IEEE.

All Science Journal Classification (ASJC) codes

Engineering (miscellaneous)
Education

Access to Document

10.1109/ICL.2015.7318048

Cite this

Hwang, Y. K., Bolander, J. E., Deressa, A. A., & Lim, Y. M. (2015). Build-up virtual laboratory for reinforced concrete structures to enhance understanding design requirements. In Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015 (pp. 330-333). [7318048] (Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICL.2015.7318048

Hwang, Young Kwang ; Bolander, John E. ; Deressa, Adeba Abera et al. / Build-up virtual laboratory for reinforced concrete structures to enhance understanding design requirements. Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015. Institute of Electrical and Electronics Engineers Inc., 2015. pp. 330-333 (Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015).

@inproceedings{7cc62580db2f4ea59a0f742e7ca1a59a,

title = "Build-up virtual laboratory for reinforced concrete structures to enhance understanding design requirements",

abstract = "In this paper, we are trying to provide a simulation tool to find the different failure behavior of reinforced concrete (RC) structures with various design conditions. For example, design code asked designers/students to make distribution of re-bars for several numbers rather than one re-bar in the designed beam. Students can estimate the total amount of reinforcement cross sectional area by simple calculation, but students have to distribute the total amount area of re-bars to several numbers of re-bars with small diameter. In this requirement of the code, the students who learn RC structure design at the beginning stage are not easy to understand from theoretical point of view. However, they can easily learn, if they have hands on experience like real experiments or numerical simulations. Here, the real experiments for RC structures are required a lot of time and cost. Therefore, if a realistic simulation tool, so-called 'Virtual RC Structure Lab', is provided for engineering educational purpose, students could have a chance to learn from virtual hands on experience for RC structure design.",

author = "Hwang, {Young Kwang} and Bolander, {John E.} and Deressa, {Adeba Abera} and Lim, {Yun Mook}",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.; International Conference on Interactive Collaborative Learning, ICL 2015 ; Conference date: 20-09-2015 Through 24-09-2015",

year = "2015",

month = nov,

day = "4",

doi = "10.1109/ICL.2015.7318048",

language = "English",

series = "Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "330--333",

booktitle = "Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015",

address = "United States",

}

Hwang, YK, Bolander, JE, Deressa, AA & Lim, YM 2015, Build-up virtual laboratory for reinforced concrete structures to enhance understanding design requirements. in Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015., 7318048, Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015, Institute of Electrical and Electronics Engineers Inc., pp. 330-333, International Conference on Interactive Collaborative Learning, ICL 2015, Firenze, Italy, 15/9/20. https://doi.org/10.1109/ICL.2015.7318048

Build-up virtual laboratory for reinforced concrete structures to enhance understanding design requirements. / Hwang, Young Kwang; Bolander, John E.; Deressa, Adeba Abera et al.
Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015. Institute of Electrical and Electronics Engineers Inc., 2015. p. 330-333 7318048 (Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - Build-up virtual laboratory for reinforced concrete structures to enhance understanding design requirements

AU - Hwang, Young Kwang

AU - Bolander, John E.

AU - Deressa, Adeba Abera

AU - Lim, Yun Mook

PY - 2015/11/4

Y1 - 2015/11/4

N2 - In this paper, we are trying to provide a simulation tool to find the different failure behavior of reinforced concrete (RC) structures with various design conditions. For example, design code asked designers/students to make distribution of re-bars for several numbers rather than one re-bar in the designed beam. Students can estimate the total amount of reinforcement cross sectional area by simple calculation, but students have to distribute the total amount area of re-bars to several numbers of re-bars with small diameter. In this requirement of the code, the students who learn RC structure design at the beginning stage are not easy to understand from theoretical point of view. However, they can easily learn, if they have hands on experience like real experiments or numerical simulations. Here, the real experiments for RC structures are required a lot of time and cost. Therefore, if a realistic simulation tool, so-called 'Virtual RC Structure Lab', is provided for engineering educational purpose, students could have a chance to learn from virtual hands on experience for RC structure design.

AB - In this paper, we are trying to provide a simulation tool to find the different failure behavior of reinforced concrete (RC) structures with various design conditions. For example, design code asked designers/students to make distribution of re-bars for several numbers rather than one re-bar in the designed beam. Students can estimate the total amount of reinforcement cross sectional area by simple calculation, but students have to distribute the total amount area of re-bars to several numbers of re-bars with small diameter. In this requirement of the code, the students who learn RC structure design at the beginning stage are not easy to understand from theoretical point of view. However, they can easily learn, if they have hands on experience like real experiments or numerical simulations. Here, the real experiments for RC structures are required a lot of time and cost. Therefore, if a realistic simulation tool, so-called 'Virtual RC Structure Lab', is provided for engineering educational purpose, students could have a chance to learn from virtual hands on experience for RC structure design.

UR - http://www.scopus.com/inward/record.url?scp=84964765499&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84964765499&partnerID=8YFLogxK

U2 - 10.1109/ICL.2015.7318048

DO - 10.1109/ICL.2015.7318048

M3 - Conference contribution

AN - SCOPUS:84964765499

T3 - Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015

SP - 330

EP - 333

BT - Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - International Conference on Interactive Collaborative Learning, ICL 2015

Y2 - 20 September 2015 through 24 September 2015

ER -

Hwang YK, Bolander JE, Deressa AA, Lim YM. Build-up virtual laboratory for reinforced concrete structures to enhance understanding design requirements. In Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015. Institute of Electrical and Electronics Engineers Inc. 2015. p. 330-333. 7318048. (Proceedings of 2015 International Conference on Interactive Collaborative Learning, ICL 2015). doi: 10.1109/ICL.2015.7318048

Build-up virtual laboratory for reinforced concrete structures to enhance understanding design requirements

Abstract

Publication series

Other

Bibliographical note

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this