Understanding separation behavior in an adsorption bed is crucial for well-designed adsorption processes. Since adsorption phenomena depend on temperature, thermal parameters, such as the internal heat transfer (hi), isosteric heat of adsorption (Qst) and axial thermal conductivity of the bed (Kw), can affect the adsorption dynamics and performance of the bed. In this study, the effects of these thermal parameters on the adsorption dynamics and breakthrough curves were analyzed with the experimental results using integrated gasification combined cycle gas from the carbon capture process (IGCC gas; H2:CO:N2:CO2:Ar = 88:3:6:2:1 mol%) as a purification gas and blast furnace gas (BFG; H2:CO:N2:CO2 = 20:0.1:44.5:35.4 mol%) as a bulk separation gas. The results were then compared with the isothermal and adiabatic results. Considering the variation of the internal heat transfer coefficient and isosteric heat of adsorption along with the propagation of gas in the bed, the temperature profiles inside the bed could be predicted better than in the case using constant values. The axial thermal conductivity of the bed significantly affected the temperature profiles as the temperature excursion was sharp. In the prediction of breakthrough curves, these variable thermal parameters could be replaced by suitable constant values estimated from experimental and theoretical approaches when well-fitted isotherm parameters were applied considering the partial pressure of each component in the feed.
|Number of pages||12|
|Journal||Separation and Purification Technology|
|Publication status||Published - 2017|
Bibliographical noteFunding Information:
We would like to acknowledge the financial support from the R&D Convergence Program of the MSIP (Ministry of Science, ICT and Future Planning) and the NST (National Research Council of Science & Technology) of the Republic of Korea (CRC-14-1-KRICT).
© 2017 Elsevier B.V.
All Science Journal Classification (ASJC) codes
- Analytical Chemistry
- Filtration and Separation