Analysis of all optical cascaded XGM wavelength converter using CW-holding beam

Ku Ik Chung; Tae Young Kim; Sang Kook Han

doi:10.1023/A:1020461208144

Analysis of all optical cascaded XGM wavelength converter using CW-holding beam

Ku Ik Chung, Tae Young Kim, Sang Kook Han

Department of Electrical and Electronic Engineering

Research output: Contribution to journal › Article › peer-review

7 Citations (Scopus)

Abstract

In this paper, we propose and analyze a wavelength conversion using an cross-gain modulation (XGM) with two semiconductor optical amplifiers and CW-holding beam for improvement of wavelength conversion speed and frequency chirp characteristics. Wavelength conversion characteristics of the cascaded XGM with a CW-holding beam are investigated in time domain. From the simulation, we have observed that the proposed scheme provides a non-inverted efficient wavelength conversion and frequency chirp reduction at higher bit rate operation.

Original language	English
Pages (from-to)	937-950
Number of pages	14
Journal	Optical and Quantum Electronics
Volume	34
Issue number	10
DOIs	https://doi.org/10.1023/A:1020461208144
Publication status	Published - 2002 Oct

Bibliographical note

Funding Information:
This work was supported by grant no. 2000-2-30200-012-3 from the Basic Research Program of the Korea Science and Engineering Foundation.

All Science Journal Classification (ASJC) codes

Electronic, Optical and Magnetic Materials
Atomic and Molecular Physics, and Optics
Electrical and Electronic Engineering

Access to Document

10.1023/A:1020461208144

Cite this

@article{c725a0f630f7473389819fe0d77d5c35,

title = "Analysis of all optical cascaded XGM wavelength converter using CW-holding beam",

abstract = "In this paper, we propose and analyze a wavelength conversion using an cross-gain modulation (XGM) with two semiconductor optical amplifiers and CW-holding beam for improvement of wavelength conversion speed and frequency chirp characteristics. Wavelength conversion characteristics of the cascaded XGM with a CW-holding beam are investigated in time domain. From the simulation, we have observed that the proposed scheme provides a non-inverted efficient wavelength conversion and frequency chirp reduction at higher bit rate operation.",

author = "Chung, {Ku Ik} and Kim, {Tae Young} and Han, {Sang Kook}",

note = "Funding Information: This work was supported by grant no. 2000-2-30200-012-3 from the Basic Research Program of the Korea Science and Engineering Foundation.",

year = "2002",

month = oct,

doi = "10.1023/A:1020461208144",

language = "English",

volume = "34",

pages = "937--950",

journal = "Optical and Quantum Electronics",

issn = "0306-8919",

publisher = "Springer New York",

number = "10",

}

TY - JOUR

T1 - Analysis of all optical cascaded XGM wavelength converter using CW-holding beam

AU - Chung, Ku Ik

AU - Kim, Tae Young

AU - Han, Sang Kook

N1 - Funding Information: This work was supported by grant no. 2000-2-30200-012-3 from the Basic Research Program of the Korea Science and Engineering Foundation.

PY - 2002/10

Y1 - 2002/10

N2 - In this paper, we propose and analyze a wavelength conversion using an cross-gain modulation (XGM) with two semiconductor optical amplifiers and CW-holding beam for improvement of wavelength conversion speed and frequency chirp characteristics. Wavelength conversion characteristics of the cascaded XGM with a CW-holding beam are investigated in time domain. From the simulation, we have observed that the proposed scheme provides a non-inverted efficient wavelength conversion and frequency chirp reduction at higher bit rate operation.

AB - In this paper, we propose and analyze a wavelength conversion using an cross-gain modulation (XGM) with two semiconductor optical amplifiers and CW-holding beam for improvement of wavelength conversion speed and frequency chirp characteristics. Wavelength conversion characteristics of the cascaded XGM with a CW-holding beam are investigated in time domain. From the simulation, we have observed that the proposed scheme provides a non-inverted efficient wavelength conversion and frequency chirp reduction at higher bit rate operation.

UR - http://www.scopus.com/inward/record.url?scp=0036803782&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0036803782&partnerID=8YFLogxK

U2 - 10.1023/A:1020461208144

DO - 10.1023/A:1020461208144

M3 - Article

AN - SCOPUS:0036803782

SN - 0306-8919

VL - 34

SP - 937

EP - 950

JO - Optical and Quantum Electronics

JF - Optical and Quantum Electronics

IS - 10

ER -

Analysis of all optical cascaded XGM wavelength converter using CW-holding beam

Abstract

Bibliographical note

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this