Aerosol assisted fabrication of metallic film/carbon fiber and heat treatment to form crystalline alloy film

Jeong Hoon Byeon; Ki Young Yoon; Jungho Hwang

doi:10.1016/j.tsf.2010.06.067

Aerosol assisted fabrication of metallic film/carbon fiber and heat treatment to form crystalline alloy film

Jeong Hoon Byeon, Ki Young Yoon, Jungho Hwang

Department of Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

Carbon fiber (CF) was catalytically activated with spark generated Pd aerosol nanoparticles. Metal (Ag, Au, Cu, and Pd) and alloy (Ni-P, Ni-Cu-P) electroless films were deposited on Pd aerosol activated CF using a range of deposition parameters including deposition rate in an electroless deposition bath. Sintering was applied to the alloy films on the CF to examine the crystallization behavior at 400 °C in a nitrogen atmosphere. Ni-Cu-P had a higher crystallinity AR than Ni-P after the treatment.

Original language	English
Pages (from-to)	6839-6843
Number of pages	5
Journal	Thin Solid Films
Volume	518
Issue number	23
DOIs	https://doi.org/10.1016/j.tsf.2010.06.067
Publication status	Published - 2010 Sept 30

Bibliographical note

Funding Information:
The authors wish to thank to the Korea Energy Management Corporation (KEMCO) through Grant No. 2008-N-PV08-P-06-0-000 for supporting this research.

All Science Journal Classification (ASJC) codes

Electronic, Optical and Magnetic Materials
Surfaces and Interfaces
Surfaces, Coatings and Films
Metals and Alloys
Materials Chemistry

Access to Document

10.1016/j.tsf.2010.06.067

Cite this

@article{f2d4ad2178594f8d9dc1864d6e23c1a4,

title = "Aerosol assisted fabrication of metallic film/carbon fiber and heat treatment to form crystalline alloy film",

abstract = "Carbon fiber (CF) was catalytically activated with spark generated Pd aerosol nanoparticles. Metal (Ag, Au, Cu, and Pd) and alloy (Ni-P, Ni-Cu-P) electroless films were deposited on Pd aerosol activated CF using a range of deposition parameters including deposition rate in an electroless deposition bath. Sintering was applied to the alloy films on the CF to examine the crystallization behavior at 400 °C in a nitrogen atmosphere. Ni-Cu-P had a higher crystallinity AR than Ni-P after the treatment.",

author = "Byeon, {Jeong Hoon} and Yoon, {Ki Young} and Jungho Hwang",

note = "Funding Information: The authors wish to thank to the Korea Energy Management Corporation (KEMCO) through Grant No. 2008-N-PV08-P-06-0-000 for supporting this research.",

year = "2010",

month = sep,

day = "30",

doi = "10.1016/j.tsf.2010.06.067",

language = "English",

volume = "518",

pages = "6839--6843",

journal = "Thin Solid Films",

issn = "0040-6090",

publisher = "Elsevier",

number = "23",

}

TY - JOUR

T1 - Aerosol assisted fabrication of metallic film/carbon fiber and heat treatment to form crystalline alloy film

AU - Byeon, Jeong Hoon

AU - Yoon, Ki Young

AU - Hwang, Jungho

N1 - Funding Information: The authors wish to thank to the Korea Energy Management Corporation (KEMCO) through Grant No. 2008-N-PV08-P-06-0-000 for supporting this research.

PY - 2010/9/30

Y1 - 2010/9/30

N2 - Carbon fiber (CF) was catalytically activated with spark generated Pd aerosol nanoparticles. Metal (Ag, Au, Cu, and Pd) and alloy (Ni-P, Ni-Cu-P) electroless films were deposited on Pd aerosol activated CF using a range of deposition parameters including deposition rate in an electroless deposition bath. Sintering was applied to the alloy films on the CF to examine the crystallization behavior at 400 °C in a nitrogen atmosphere. Ni-Cu-P had a higher crystallinity AR than Ni-P after the treatment.

AB - Carbon fiber (CF) was catalytically activated with spark generated Pd aerosol nanoparticles. Metal (Ag, Au, Cu, and Pd) and alloy (Ni-P, Ni-Cu-P) electroless films were deposited on Pd aerosol activated CF using a range of deposition parameters including deposition rate in an electroless deposition bath. Sintering was applied to the alloy films on the CF to examine the crystallization behavior at 400 °C in a nitrogen atmosphere. Ni-Cu-P had a higher crystallinity AR than Ni-P after the treatment.

UR - http://www.scopus.com/inward/record.url?scp=77956230471&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77956230471&partnerID=8YFLogxK

U2 - 10.1016/j.tsf.2010.06.067

DO - 10.1016/j.tsf.2010.06.067

M3 - Article

AN - SCOPUS:77956230471

SN - 0040-6090

VL - 518

SP - 6839

EP - 6843

JO - Thin Solid Films

JF - Thin Solid Films

IS - 23

ER -

Aerosol assisted fabrication of metallic film/carbon fiber and heat treatment to form crystalline alloy film

Abstract

Bibliographical note

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this