A POI-based RFID reader deployment and associated interference effect

Donghun An; Hoongee Yang; Sunghyun Yang; Youngsoo Kim; Jonggwan Yook; Bongsoon Kang

doi:10.1093/ietfec/e91-a.2.700

A POI-based RFID reader deployment and associated interference effect

Donghun An, Hoongee Yang, Sunghyun Yang, Youngsoo Kim, Jonggwan Yook, Bongsoon Kang

Department of Electrical and Electronic Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

This paper presents a simulation based method to predict the amount of frequency interference in a passive type RFID system. To judge occurrence of frequency interference, we use a parameter POI (probability of interference) that depends on several factors such as multiple access method, emission mask, the number of channel, etc. Due to its dependence on several factors, a Monte-carlo based simulation is suitably used. Through the simulation, we draw minimum separation distance between two readers and examine performance degradation due to aggregate interfering readers. Moreover, we present a reader deployment strategy based on the average POI of active readers operating in some area.

Original language	English
Pages (from-to)	700-703
Number of pages	4
Journal	IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences
Volume	E91-A
Issue number	2
DOIs	https://doi.org/10.1093/ietfec/e91-a.2.700
Publication status	Published - 2008

All Science Journal Classification (ASJC) codes

Signal Processing
Computer Graphics and Computer-Aided Design
Electrical and Electronic Engineering
Applied Mathematics

Access to Document

10.1093/ietfec/e91-a.2.700

Cite this

@article{3f351f6b282646e98b86686ef97ca386,

title = "A POI-based RFID reader deployment and associated interference effect",

abstract = "This paper presents a simulation based method to predict the amount of frequency interference in a passive type RFID system. To judge occurrence of frequency interference, we use a parameter POI (probability of interference) that depends on several factors such as multiple access method, emission mask, the number of channel, etc. Due to its dependence on several factors, a Monte-carlo based simulation is suitably used. Through the simulation, we draw minimum separation distance between two readers and examine performance degradation due to aggregate interfering readers. Moreover, we present a reader deployment strategy based on the average POI of active readers operating in some area.",

author = "Donghun An and Hoongee Yang and Sunghyun Yang and Youngsoo Kim and Jonggwan Yook and Bongsoon Kang",

year = "2008",

doi = "10.1093/ietfec/e91-a.2.700",

language = "English",

volume = "E91-A",

pages = "700--703",

journal = "IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences",

issn = "0916-8508",

publisher = "Maruzen Co., Ltd/Maruzen Kabushikikaisha",

number = "2",

}

TY - JOUR

T1 - A POI-based RFID reader deployment and associated interference effect

AU - An, Donghun

AU - Yang, Hoongee

AU - Yang, Sunghyun

AU - Kim, Youngsoo

AU - Yook, Jonggwan

AU - Kang, Bongsoon

PY - 2008

Y1 - 2008

N2 - This paper presents a simulation based method to predict the amount of frequency interference in a passive type RFID system. To judge occurrence of frequency interference, we use a parameter POI (probability of interference) that depends on several factors such as multiple access method, emission mask, the number of channel, etc. Due to its dependence on several factors, a Monte-carlo based simulation is suitably used. Through the simulation, we draw minimum separation distance between two readers and examine performance degradation due to aggregate interfering readers. Moreover, we present a reader deployment strategy based on the average POI of active readers operating in some area.

AB - This paper presents a simulation based method to predict the amount of frequency interference in a passive type RFID system. To judge occurrence of frequency interference, we use a parameter POI (probability of interference) that depends on several factors such as multiple access method, emission mask, the number of channel, etc. Due to its dependence on several factors, a Monte-carlo based simulation is suitably used. Through the simulation, we draw minimum separation distance between two readers and examine performance degradation due to aggregate interfering readers. Moreover, we present a reader deployment strategy based on the average POI of active readers operating in some area.

UR - http://www.scopus.com/inward/record.url?scp=77951186916&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77951186916&partnerID=8YFLogxK

U2 - 10.1093/ietfec/e91-a.2.700

DO - 10.1093/ietfec/e91-a.2.700

M3 - Article

AN - SCOPUS:77951186916

SN - 0916-8508

VL - E91-A

SP - 700

EP - 703

JO - IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences

JF - IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences

IS - 2

ER -

A POI-based RFID reader deployment and associated interference effect

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this