A novel zwitterion incorporated Nano-crystalline ceramic and polymer for bacterial resistant dental CAD-CAM block

Objectives: To create bacteria-resistant dental CAD-CAM blocks with a biofilm-resistant effect by incorporating Nano-crystalline ceramic and polymer (NCP) with 2-methacryloyloxyethyl phosphorylcholine (MPC) and sulfobetaine methacrylate (SBMA) and at an equimolar ratio, referred to as MS. Methods: Experimental groups comprised NCP blocks containing zwitterions at 0.15wt% (MS015) and 0.45wt% (MS045). NCP blocks without MS served as control (CTRL). Flexural strength, surface hardness, water sorption and solubility, photometric properties, and cytotoxicity were assessed for all samples. Additionally, the resistance to single and multi-species bacterial adhesion was investigated. Results: MS045 showed significant reduction in flexural strength (P < 0.01) compared to both CTRL and MS015. Both MS015 and MS045 showed significantly increased water sorption and significant reduction in water solubility compared to CTRL. Light transmission remained consistent across all MS content levels, but the irradiance value decreased by 12 % in the MS045 group compared to the MS015 group. Notably, compared to the CTRL group, the MS015 group exhibited enhanced resistance to adhesion by Porphyromonas gingivalis and a multi-species salivary biofilm, with biofilm thickness and biomass reduced by 45 % and 56 %, respectively. Conclusions: NCP containing 0.15 % MS can effectively reduce adhesion of multiple species of bacteria while maintaining physical and mechanical properties. Clinical Significance: NCP integrating zwitterions is clinically advantageous in resisting bacterial adhesion at internal and external margins of milled indirect restoration.