Find Research outputs

Search results

• 3D numerical simulation of compound open channel flows with vegetated floodplains by Reynolds stress model

  Kang, H. & Choi, S. U., 2004, Proceedings of the 2004 World Water and Environmetal Resources Congress: Critical Transitions in Water and Environmental Resources Management. Sehlke, G., Hayes, D. F. & Stevens, D. K. (eds.). p. 1408-1417 10 p. (Proceedings of the 2004 World Water and Environmetal Resources Congress: Critical Transitions in Water and Environmetal Resources Management).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Citations (Scopus)

• 3D numerical simulation of gas-solid hydrodynamics and coal combustion in an industrial scale circulating fluidized bed

  Farid, M. M., Jeong, H. J., Lee, J. M., Kim, D. W. & Hwang, J., 2013, p. 2130-2165. 36 p.

  Research output: Contribution to conference › Paper › peer-review

• 3D object duplicate detection for video retrieval

  Vajda, P., Ivanov, I., Goldmann, L., Lee, J. S. & Ebrahimi, T., 2010, 11th International Workshop on Image Analysis for Multimedia Interactive Services, WIAMIS 10. 5617669. (11th International Workshop on Image Analysis for Multimedia Interactive Services, WIAMIS 10).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• 3D OCT versus FFR for jailed side-branch ostial stenoses

  Ha, J., Kim, J. S., Mintz, G. S., Kim, B. K., Shin, D. H., Ko, Y. G., Choi, D., Jang, Y. & Hong, M. K., 2014 Feb, In: JACC: Cardiovascular Imaging. 7, 2, p. 204-205 2 p.

  Research output: Contribution to journal › Letter › peer-review

  Open Access
  12 Citations (Scopus)

• 3D Optical memory by photoluminescence change in sm-doped sodium borate glass

  Lee, M., Lim, J., Kim, E., Lee, S. & Lim, K., 2005, Nanophotonics for Information Systems, NPIS 2005. Optical Society of America (OSA), (Optics InfoBase Conference Papers).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D Organoid Culture From Adult Salivary Gland Tissues as an ex vivo Modeling of Salivary Gland Morphogenesis

  Kim, D., Yoon, Y. J., Choi, D., Kim, J. & Lim, J. Y., 2021 Aug 12, In: Frontiers in Cell and Developmental Biology. 9, 698292.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  5 Citations (Scopus)

• 3D perception based quality pooling: Stereopsis, binocular rivalry, and binocular suppression

  Lee, K. & Lee, S., 2015 Apr 1, In: IEEE Journal on Selected Topics in Signal Processing. 9, 3, p. 533-545 13 p., 7010890.

  Research output: Contribution to journal › Article › peer-review
  60 Citations (Scopus)

• 3D perception based quality pooling on stereoscopic image

  Kim, H., Kim, J. & Lee, S., 2015 Dec 9, 2015 IEEE International Conference on Image Processing, ICIP 2015 - Proceedings. IEEE Computer Society, p. 3382-3386 5 p. 7351431. (Proceedings - International Conference on Image Processing, ICIP; vol. 2015-December).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D-printable, highly conductive hybrid composites employing chemically-reinforced, complex dimensional fillers and thermoplastic triblock copolymers

  Jo, Y., Kim, J. Y., Kim, S. Y., Seo, Y. H., Jang, K. S., Lee, S. Y., Jung, S., Ryu, B. H., Kim, H. S., Park, J. U., Choi, Y. & Jeong, S., 2017 Apr 28, In: Nanoscale. 9, 16, p. 5072-5084 13 p.

  Research output: Contribution to journal › Article › peer-review
  52 Citations (Scopus)

• 3D-printed Ag/AgCl pseudo-reference electrodes

  Rohaizad, N., Mayorga-Martinez, C. C., Novotný, F., Webster, R. D. & Pumera, M., 2019 Jun, In: Electrochemistry Communications. 103, p. 104-108 5 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  55 Citations (Scopus)

• 3d-printed barrier membrane using mixture of polycaprolactone and beta-tricalcium phosphate for regeneration of rabbit calvarial defects

  Lee, J. Y., Park, J. Y., Hong, I. P., Jeon, S. H., Cha, J. K., Paik, J. W. & Choi, S. H., 2021 Jun 2, In: Materials. 14, 12, 3280.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• 3D-printed biomimetic-villus structure with maximized surface area for triboelectric nanogenerator and dust filter

  Yoon, H. J., Kim, D. H., Seung, W., Khan, U., Kim, T. Y., Kim, T. & Kim, S. W., 2019 Sept, In: Nano Energy. 63, 103857.

  Research output: Contribution to journal › Article › peer-review
  38 Citations (Scopus)

• 3D-printed biosensors for electrochemical and optical applications

  Muñoz, J. & Pumera, M., 2020 Jul, In: TrAC - Trends in Analytical Chemistry. 128, 115933.

  Research output: Contribution to journal › Review article › peer-review
  70 Citations (Scopus)

• 3D-Printed COVID-19 immunosensors with electronic readout

  Muñoz, J. & Pumera, M., 2021 Dec 1, In: Chemical Engineering Journal. 425, 131433.

  Research output: Contribution to journal › Article › peer-review
  39 Citations (Scopus)

• 3D-printed Electrochemical Sensor for Organophosphate Nerve Agents

  Jyoti, Redondo, E., Alduhaish, O. & Pumera, M., 2023 Jan, In: Electroanalysis. 35, 1, e202200047.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• 3D Printed Electrodes for Detection of Nitroaromatic Explosives and Nerve Agents

  Tan, C., Nasir, M. Z. M., Ambrosi, A. & Pumera, M., 2017 Sept 5, In: Analytical Chemistry. 89, 17, p. 8995-9001 7 p.

  Research output: Contribution to journal › Article › peer-review
  67 Citations (Scopus)

• 3D-printed Electrodes for Sensing of Biologically Active Molecules

  Liyarita, B. R., Ambrosi, A. & Pumera, M., 2018 Jul, In: Electroanalysis. 30, 7, p. 1319-1326 8 p.

  Research output: Contribution to journal › Article › peer-review
  42 Citations (Scopus)

• 3D-printed electrodes for the detection of mycotoxins in food

  Zafir Mohamad Nasir, M., Novotný, F., Alduhaish, O. & Pumera, M., 2020 Jun, In: Electrochemistry Communications. 115, 106735.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  18 Citations (Scopus)

• 3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis

  Manzanares Palenzuela, C. L., Novotný, F., Krupička, P., Sofer, Z. & Pumera, M., 2018 May 1, In: Analytical Chemistry. 90, 9, p. 5753-5757 5 p.

  Research output: Contribution to journal › Article › peer-review
  177 Citations (Scopus)

• 3D-printed graphene direct electron transfer enzyme biosensors

  López Marzo, A. M., Mayorga-Martinez, C. C. & Pumera, M., 2020 Mar 1, In: Biosensors and Bioelectronics. 151, 111980.

  Research output: Contribution to journal › Article › peer-review
  109 Citations (Scopus)

• 3D Printed Graphene Electrodes' Electrochemical Activation

  Browne, M. P., Novotný, F., Sofer, Z. & Pumera, M., 2018 Nov 21, In: ACS Applied Materials and Interfaces. 10, 46, p. 40294-40301 8 p.

  Research output: Contribution to journal › Article › peer-review
  153 Citations (Scopus)

• 3D-printed metal electrodes for electrochemical detection of phenols

  Cheng, T. S., Nasir, M. Z. M., Ambrosi, A. & Pumera, M., 2017 Dec, In: Applied Materials Today. 9, p. 212-219 8 p.

  Research output: Contribution to journal › Article › peer-review
  47 Citations (Scopus)

• 3D-printed Metal Electrodes for Heavy Metals Detection by Anodic Stripping Voltammetry

  Lee, K. Y., Ambrosi, A. & Pumera, M., 2017 Nov, In: Electroanalysis. 29, 11, p. 2444-2453 10 p.

  Research output: Contribution to journal › Article › peer-review
  58 Citations (Scopus)

• 3D Printed Nanocarbon Frameworks for Li-Ion Battery Cathodes

  Gao, W. & Pumera, M., 2021 Mar 10, In: Advanced Functional Materials. 31, 11, 2007285.

  Research output: Contribution to journal › Article › peer-review
  34 Citations (Scopus)

• 3D-printed nanocarbon sensors for the detection of chlorophenols and nitrophenols: Towards environmental applications of additive manufacturing

  Jyoti, Redondo, E., Alduhaish, O. & Pumera, M., 2021 Apr, In: Electrochemistry Communications. 125, 106984.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  5 Citations (Scopus)

• 3D-printed polycaprolactone scaffold mixed with β-tricalcium phosphate as a bone regenerative material in rabbit calvarial defects

  Pae, H. C., Kang, J. H., Cha, J. K., Lee, J. S., Paik, J. W., Jung, U. W., Kim, B. H. & Choi, S. H., 2019 May, In: Journal of Biomedical Materials Research - Part B Applied Biomaterials. 107, 4, p. 1254-1263 10 p.

  Research output: Contribution to journal › Article › peer-review
  41 Citations (Scopus)

• 3d-printed recoverable microdrive and base plate system for rodent electrophysiology

  Vöröslakos, M., Miyawaki, H., Royer, S., Diba, K., Yoon, E., Petersen, P. C. & Buzsáki, G., 2021 Aug 20, In: Bio-protocol. 11, 16, e4137.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• 3D-Printed SARS-CoV-2 RNA Genosensing Microfluidic System

  Crevillen, A. G., Mayorga-Martinez, C. C., Vaghasiya, J. V. & Pumera, M., 2022 Jun, In: Advanced Materials Technologies. 7, 6, 2101121.

  Research output: Contribution to journal › Article › peer-review
  12 Citations (Scopus)

• 3D-Printed Sugar Scaffold for High-Precision and Highly Sensitive Active and Passive Wearable Sensors

  Ho, D. H., Hong, P., Han, J. T., Kim, S. Y., Kwon, S. J. & Cho, J. H., 2020 Jan 1, In: Advanced Science. 7, 1, 1902521.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  27 Citations (Scopus)

• 3D-printed transmembrane glycoprotein cancer biomarker aptasensor

  Crevillen, A. G., Mayorga-Martinez, C. C., Zelenka, J., Rimpelová, S., Ruml, T. & Pumera, M., 2021 Sept, In: Applied Materials Today. 24, 101153.

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)

• 3D Printing for Electrochemical Energy Applications

  Browne, M. P., Redondo, E. & Pumera, M., 2020 Mar 11, In: Chemical Reviews. 120, 5, p. 2783-2810 28 p.

  Research output: Contribution to journal › Article › peer-review
  179 Citations (Scopus)

• 3D Printing of a miniature turbine blade model with an embedded fibre Bragg grating sensor for high-temperature monitoring

  Kim, S. I., Jung, H. Y., Yang, S., Yoon, J., Lee, H. & Ryu, W. H., 2022, In: Virtual and Physical Prototyping. 17, 2, p. 156-169 14 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• 3D printing of functional microrobots

  Li, J. & Pumera, M., 2021 Feb 21, In: Chemical Society reviews. 50, 4, p. 2794-2838 45 p.

  Research output: Contribution to journal › Review article › peer-review
  115 Citations (Scopus)

• 3D printing of metasurface-based dual-linear polarization converter

  Lee, G., Noh, Y. H., Lee, I. G., Hong, I. P., Yook, J. G., Kim, J. Y. & Kim, J., 2021 Dec, In: Flexible and Printed Electronics. 6, 4, 045012.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• 3D Printing of Thylakoid-PEDOT:PSS Composite Electrode for Bio-Photoelectrochemical Cells

  Kim, Y. J., Kim, S. I., Kim, J. H., Yun, J. H., Hong, H., Kim, J. & Ryu, W. H., 2023 Jan 23, In: ACS Applied Energy Materials. 6, 2, p. 773-781 9 p.

  Research output: Contribution to journal › Article › peer-review

• 3D-printing technologies for electrochemical applications

  Ambrosi, A. & Pumera, M., 2016 May 21, In: Chemical Society reviews. 45, 10, p. 2740-2755 16 p.

  Research output: Contribution to journal › Review article › peer-review
  630 Citations (Scopus)

• 3D Printing Temperature Tailors Electrical and Electrochemical Properties through Changing Inner Distribution of Graphite/Polymer

  Iffelsberger, C., Jellett, C. W. & Pumera, M., 2021 Jun 17, In: Small. 17, 24, 2101233.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  15 Citations (Scopus)

• 3D-Printing to Mitigate COVID-19 Pandemic

  Kumar, K. P. A. & Pumera, M., 2021 May 26, In: Advanced Functional Materials. 31, 22, 2100450.

  Research output: Contribution to journal › Article › peer-review
  27 Citations (Scopus)

• 3-D Probe: Low-cost variation modeling using intertest-item correlations

  Chung, J., Kim, Y. & Yang, J. S., 2014 Dec, In: IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems. 33, 12, p. 2005-2009 5 p., 6918480.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• 3D QAM-DPSK Optical Transmission Employing a Single Mach-Zehnder Modulator and Optical Direct Detection

  Park, H. J., Ha, I. H., Kang, S. M., Shin, W. H. & Han, S. K., 2020 Nov 15, In: Journal of Lightwave Technology. 38, 22, p. 6247-6256 10 p., 9146992.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• 3D ray-tracing model including effect of inhomogeneous building surface for characterization of wireless communication channel

  Koh, I. S., Kwon, S., Lim, J. W. & Yoon, Y. J., 2007, 2007 IEEE Antennas and Propagation Society International Symposium, AP-S. p. 4116-4119 4 p. 4396446. (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• 3D reconstruction from stereo images for interactions between real and virtual objects

  Kim, H. & Sohn, K., 2005 Jan, In: Signal Processing: Image Communication. 20, 1, p. 61-75 15 p.

  Research output: Contribution to journal › Article › peer-review
  16 Citations (Scopus)

• 3D reconstruction of a concrete mixer truck for training object detectors

  Kim, H. & Kim, H., 2018 Apr, In: Automation in Construction. 88, p. 23-30 8 p.

  Research output: Contribution to journal › Article › peer-review
  26 Citations (Scopus)

• 3D reconstruction of stereo images for interaction between real and virtual worlds

  Kim, H., Yang, S. J. & Sohn, K., 2003, Proceedings - 2nd IEEE and ACM International Symposium on Mixed and Augmented Reality, ISMAR 2003. Institute of Electrical and Electronics Engineers Inc., p. 169-176 8 p. 1240700. (Proceedings - 2nd IEEE and ACM International Symposium on Mixed and Augmented Reality, ISMAR 2003).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  24 Citations (Scopus)

• 3D scene reconstruction system with hand-held stereo cameras

  Yun, S. U., Min, D. & Sohn, K., 2007, Proceedings of 3DTV-CON. 4379475. (Proceedings of 3DTV-CON).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• 3-D Shape from a Shaded and Textural Surface Image

  Choe, Y. & Kashyap, R. L., 1991 Sept, In: IEEE transactions on pattern analysis and machine intelligence. 13, 9, p. 907-919 13 p.

  Research output: Contribution to journal › Article › peer-review
  28 Citations (Scopus)

• 3-D Stacked DRAM Refresh Management with Guaranteed Data Reliability

  Lim, J., Lim, H. & Kang, S., 2015 Sept 1, In: IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems. 34, 9, p. 1455-1466 12 p., 7061398.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• 3D-stacked vertical channel nonvolatile polymer memory

  Hwang, S. K., Cho, S. M., Kim, K. L. & Park, C., 2015 Feb, In: Advanced Electronic Materials. 1, 1-2, 1400042.

  Research output: Contribution to journal › Article › peer-review
  16 Citations (Scopus)

• 3D structure of individual nanocrystals in solution by electron microscopy

  Park, J., Elmlund, H., Ercius, P., Yuk, J. M., Limmer, D. T., Chen, Q., Kim, K., Han, S. H., Weitz, D. A., Zettl, A. & Alivisatos, A. P., 2015 Jul 17, In: Science. 349, 6245, p. 290-295 6 p.

  Research output: Contribution to journal › Article › peer-review
  204 Citations (Scopus)

• 3D Synergistically Active Carbon Nanofibers for Improved Oxygen Evolution

  Zhu, Y. P., Jing, Y., Vasileff, A., Heine, T. & Qiao, S. Z., 2017 Jul 19, In: Advanced Energy Materials. 7, 14

  Research output: Contribution to journal › Article › peer-review
  105 Citations (Scopus)