Department of Architecture and Architectural Engineering

Research output

Research output per year 1994 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2024

• 43914 Citations
• 95 h-index
• 1180 Article
• 100 Conference contribution
• 40 Conference article
• 40 Review article
• 57 More
  • 29 Paper
  • 10 Comment/debate
  • 10 Editorial
  • 6 Chapter
  • 1 Letter
  • 1 Patent

Research output per year

Research output per year

Search results

• 2023

  FIRE RETARD ANT AND GASEOUS HAZARDOUS SUBSTANCES EVALUATION OF THERMAL INSULATION MATERIALS FOR COMPOSITE PANELS

  Wi, S., Kim, Y. U., Yang, S. & Kim, S., 2023.

  Research output: Contribution to conference › Paper › peer-review

  • Thermal Insulation 100%
  • Insulating Material 100%
  • Substance Evaluation 100%
  • Polystyrene 50%
  • Polyethylene 50%

• THERMAL PROPERTIES EVALUATION OF PCM AND BIOCHAR APPLIED IN TERIOR FINISHING MATERIALS

  Kim, Y. U., Wi, S., Yun, B. Y. & Kim, S., 2023.

  Research output: Contribution to conference › Paper › peer-review

  • Phase Change Material 100%
  • Material Finishing 100%
  • Biochar 100%
  • Thermal Property 100%
  • Latent Heat 100%
• 2022

  Assessment on Economic Effect of Seismic Retrofit to RC School Building Considering Expected Damage

  Kim, D. W., Choi, I., Kim, J. H., Chang, H. J. & Hahn, S. J., 2022.

  Research output: Contribution to conference › Paper › peer-review

  • Retrofit 100%
  • School Buildings 40%
  • Repair Cost 30%
  • Reinforced Concrete 30%
  • Expected Cost 30%

• Hygrothermal behavior assessment in building walls and indoors by numerical analysis

  Kang, Y., Jo, H. H., Yuk, H. & Kim, S., 2022.

  Research output: Contribution to conference › Paper › peer-review

  • Moisture Transfer 100%
  • Hygrothermal Performance 50%

• Proposal and evaluation of energy-saving IAQ control retrofit technology for educational buildings

  Jo, H. H., Nam, J., Kang, Y. & Kim, S., 2022.

  Research output: Contribution to conference › Paper › peer-review

  • Energy Conservation 100%
  • Retrofit 100%
  • Performance Improvement 16%
• 2019

  A chatbot system for construction daily report information management

  Cho, J. & Lee, G., 2019 Jan 1, p. 429-437. 9 p.

  Research output: Contribution to conference › Paper › peer-review

  • Instant Messaging 100%
  • Application 100%
  • Information Management 33%
  • Database Systems 33%
  • Success Factor 33%
  14 Citations (Scopus)
• 2018

  Classification of images from construction sites using a deep-learning algorithm

  Gil, D., Lee, G. & Jeon, K., 2018 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

  • Image 100%
  • Classifier 50%
  • Construction 50%
  • Learning Algorithm 50%
  • Deep Learning 50%
  10 Citations (Scopus)

• Evaluation of building energy of wooden houses wite Korean cross-laminate timber using simulation analysis

  Chang, S. J. & Kim, S., 2018.

  Research output: Contribution to conference › Paper › peer-review

  • Houses 100%
  • Thermal Conductivity 75%
  • Heating Energy 50%
  • Energy Demand 50%
  • Lamination 25%
• 2017

  A study on the effect of the use of augmented reality on students' quantity take-off performance

  Suk, S. J., Ford, G., Kang, Y. & Ahn, Y. H., 2017, p. 189-192. 4 p.

  Research output: Contribution to conference › Paper › peer-review

  • Students 100%
  • Quantity 81%
  • Attempt 72%
  • Augmented Reality 45%
  • Performance 36%
  5 Citations (Scopus)

• Changes in the BIM service provision of top BIM companies: A five-year longitudinal study

  Jung, N. & Lee, G., 2017, p. 975-981. 7 p.

  Research output: Contribution to conference › Paper › peer-review

  • Information 100%
  • Scientific Modelling 50%
  • Buildings 50%
  • Building Information Modeling 50%
  • Service Industries 33%
• 2016

  A preliminary study on text mining-based human resource allocation in a construction project

  Han, S. & Lee, G., 2016, p. 383-391. 9 p.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

  • Algorithms 100%
  • Human Resource 75%
  • Text Mining 75%
  • Resource Allocation 75%
  • Analysis System 50%
  2 Citations (Scopus)

• Derivation of the factors influencing the network performance of serverless smart exit sign systems based on wireless sensor networks

  Kim, H., Lee, G. & Cho, J., 2016, p. 496-504. 9 p.

  Research output: Contribution to conference › Paper › peer-review

  Open Access

  • Wireless Sensor Network 100%
  • Network Performance 100%
  • Influencing Factor 33%
  • Server 33%
  • Network Property 33%
  1 Citation (Scopus)
• 2015

  Thermal evaluation and preparation of mortar containing N-hexadecane/xgnp sspcm for energy efficient buildings

  Wi, S., Kim, S., Chang, S. J., Jeong, S. G. & Kim, S., 2015.

  Research output: Contribution to conference › Paper › peer-review

  • Shapes 100%
  • Phase Change Material 100%
  • Mortar 70%
  • Reduction 30%
  • Buildings 30%
• 2014

  Development of environment-friendly furnishing materials using tannin resin

  Lee, J. H., Seo, J., Yu, S. & Kim, S., 2014, p. 95-98. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• Optimal seismic design method to induce the beam-hinging mechanism in reinforced concrete frames

  Choi, S. W., Park, K., Oh, B. K., Kim, Y. & Park, H. S., 2014.

  Research output: Contribution to conference › Paper › peer-review

  • Columns (Structural) 100%
  • Beam 100%
  • Reinforced Concrete 83%
  • Constraints 50%
  • Optimization 33%
  1 Citation (Scopus)
• 2013

  Application of coupled simulation between bes-cfd for naturally ventilated residential buildings

  Kim, H., Haw, J., Kim, T. & Leigh, S. B., 2013, p. 3786-3793. 8 p.

  Research output: Contribution to conference › Paper › peer-review

  • Computational Fluid Dynamics 100%
  • Energy Simulation 83%
  • Airflow 83%
  • Airflow Rate 66%
  • Buildings 66%
  2 Citations (Scopus)

• Preparation and thermal characterisitcs of mortar containing octadecane/XGNP SSPCM

  Kim, S., Seo, J., Chung, O. & Kim, S., 2013, p. 8722-8730. 9 p.

  Research output: Contribution to conference › Paper › peer-review
• 2012

  Analysis of indoor thermal characteristics for the application of PCMs in buildings

  Lee, S., Jeon, J., Lim, J., Song, S. & Kim, S., 2012, p. 93-100. 8 p.

  Research output: Contribution to conference › Paper › peer-review

  • Phase Change Temperature 100%
  • Phase Change Materials 45%
  • Phase Change Material 45%
  • Indoor Temperature 27%
  • Peak Load 27%

• Enhancing impact resistance of concrete slabs strengthened with FRPS and steel fibers

  Yoo, D. Y., Min, K. H., Lee, J. Y. & Yoon, Y. S., 2012.

  Research output: Contribution to conference › Paper › peer-review

  • Steel Fibre 100%
  • Steel Fiber 100%
  • Fibre Reinforced Polymer 50%
  • Impact Resistance 33%
  • Impact Loads 33%
  4 Citations (Scopus)
• 2011

  Algorithm for efficiently extracting IFC building elements from an IFC building model

  Won, J. & Lee, G., 2011, p. 713-719. 7 p.

  Research output: Contribution to conference › Paper › peer-review

  • Algorithms 100%
  • Efficient Algorithm 10%
  • Simulation Mode 10%
  • Information Project 10%
  • Extracting Information 10%
  11 Citations (Scopus)

• A study of sight area rate analysis algorithm on theater design

  Kim, Y. & Lee, G., 2011, p. 706-712. 7 p.

  Research output: Contribution to conference › Paper › peer-review

  • Area 100%
  • Algorithms 55%
  • Algorithm 55%
  • View 44%
  • Design 22%

• Effect of reducing indoor acetaldehyde concentration of sorptive building material

  Seo, J., Lee, S. & Kim, S., 2011, p. 2769-2772. 4 p.

  Research output: Contribution to conference › Paper › peer-review

  • Concentration 100%
  • Building Material 83%
  • Computational Fluid Dynamics 66%
  • Contaminant 66%
  • Acetaldehyde 50%

• Engineering productivity comparison: 2D vs. 3D

  Kang, Y., Yun, S., Suk, S. J., Dai, J. & Mulva, S. P., 2011, p. 2679-2687. 9 p.

  Research output: Contribution to conference › Paper › peer-review

  • Platform Design 100%
  • Productivity 87%
  • Engineering 62%
  • Devices 25%
  • Enhancement 12%

• Increasing thermal conductivity of engineered flooring through exfoliated graphite composites for building energy conservation

  Seo, J. & Kim, S., 2011.

  Research output: Contribution to conference › Paper › peer-review
• 2008

  Function enhancement evaluation of VE proposal by function classification

  Kim, J., Heo, J., Hyun, C. T. & Hong, T., 2008.

  Research output: Contribution to conference › Paper › peer-review

  • Enhancement 100%
  • Evaluation 100%
  • Augmentation 100%
  • Classification 66%
  • Proposal 66%

• Unscented information filtering method for reducing multiple sensor registration error

  Kim, Y. S., Lee, J. H., Do, H. M., Kim, B. K., Tanikawa, T., Ohba, K., Lee, G. & Yun, S. H., 2008, p. 326-331. 6 p.

  Research output: Contribution to conference › Paper › peer-review

  • Sensor 100%
  • Procedures 87%
  • Error 87%
  • Filtration 62%
  • Filtering Method 62%
  15 Citations (Scopus)
• 2007

  Indoor humidity influenced by the stack effect in high-rise residential buildings

  Kim, B. S., Park, S., Lee, J. & Lim, T., 2007, p. 886-891. 6 p.

  Research output: Contribution to conference › Paper › peer-review

  • Residential Building 100%
  • Curtain Wall 100%
  • Interior Surface 66%
  • Design Alternative 33%
  • Design Stage 33%
  1 Citation (Scopus)

• Influence analysis of stack effect on odor dispersion from unit to core in the high-rise residential buildings

  Suh, H., Kim, B. S., Kim, T. & Lim, J., 2007, p. 1062-1068. 7 p.

  Research output: Contribution to conference › Paper › peer-review

  • Core 100%
  • Air 100%
  • Stack 75%
  • Inflow 50%
  • Residential Building 50%
  2 Citations (Scopus)
• 1996

  Sensitivity coefficients and unit load method for drift control of tall buildings

  Park, H. S. & Park, C. L., 1996, p. 1788-1797. 10 p.

  Research output: Contribution to conference › Paper › peer-review

  • Model Structure 100%
  • Lateral Displacement 100%
  • Sensitivity Coefficient 100%
  • High-Rise Building 100%
  • Participation 100%